Stock: 1
Model: SC23842
UPC: 6009515826529
Classic Torx Bits - 50 mm
TX Bit No. TX10
Packaging: 2 Pack Carded
The
Classic Torx Bit is hardened using a special procedure. The tough version resulting
from this method meets the demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by means of various hardening
and coating methods. It provides a consistent hardness of ~700HV and features a
highly accurate fit in the screw.
Universal hexagonal shaft in 6,35 mm (....
R 214.99
Ex VAT:R 186.95
Out Of Stock
Stock: Out Of Stock
Model: SC23852
UPC: 6009515826536
Classic Torx Bits - 50 mm
TX Bit No. TX15
Packaging: 2 Pack Carded
The
Classic Torx Bit is hardened using a special procedure. The tough version resulting
from this method meets the demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by means of various hardening
and coating methods. It provides a consistent hardness of ~700HV and features a
highly accurate fit in the screw.
Universal hexagonal shaft in 6,35 mm (....
R 214.99
Ex VAT:R 186.95
Stock: 16
Model: SC23862
UPC: 6009515826543
Classic Torx Bits - 50 mm
TX Bit No. TX20
Packaging: 2 Pack Carded
The
Classic Torx Bit is hardened using a special procedure. The tough version resulting
from this method meets the demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by means of various hardening
and coating methods. It provides a consistent hardness of ~700HV and features a
highly accurate fit in the screw.
Universal hexagonal shaft in 6,35 mm (....
R 215.05
Ex VAT:R 187.00
Stock: 93
Model: SC23889
UPC: 6009515803934
Classic Torx Bits - 50 mm
TX Bit No. TX27
Packaging: Bulk (sold
per piece)
The
Classic Torx Bit is hardened using a special procedure. The tough version resulting
from this method meets the demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by means of various hardening
and coating methods. It provides a consistent hardness of ~700HV and features a
highly accurate fit in the screw.
Universal hexagonal shaft in....
R 100.68
Ex VAT:R 87.55
Out Of Stock
Stock: Out Of Stock
Model: SC25160
UPC: 4012929251605
Classic Hexagon Tamper Proof Bits
Tamper Proof Hex Bit: 3 mm (length: 25 mm)
Packaging: Bulk (sold per piece)
The Tamper Proof
Hex driver is developed as a security application. See the picture of the example screw. The Classic Hexagon Bit is hardened using a special procedure. The tough version resulting
from this method meets the demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by means of various ha....
R 67.56
Ex VAT:R 58.75
Stock: 69
Model: SC25180
UPC: 4012929251803
Classic Hexagon Tamper Proof Bits
Tamper Proof Hex Bit: 5 mm (length: 25 mm)
Packaging: Bulk (sold per piece)
The Tamper Proof
Hex driver is developed as a security application. See the picture of the example screw. The Classic Hexagon Bit is hardened using a special procedure. The tough version resulting
from this method meets the demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are optimized by means of various ha....
R 70.96
Ex VAT:R 61.70
Stock: 265
Model: SC37231
UPC: 4012929372317
Magnetic Bit Holder
Magnetic Bit Holder ¼"
Length: 58mm
Packaging: 1 Pack Carded
An extension to use with your screwdriver to hold a Pozidriv, Square, Phillips or Slotted screwdriver bit by means of a magnet. Very useful to hold screws without hurting fingers. All bits with a ¼ inch drive will fit in this magnetic holder.
Universal hexagonal shaft in 6.35 mm (¼ inch)....
R 115.92
Ex VAT:R 100.80
In Stock Soon
Stock: In Stock Soon
Model: SPC00051
UPC: 6009515825157
Adaptor for a polisher
Thread: M14 Male - Ø8mm
spindle
Application:
The adaptor is used to connect a drill with a 3 jaw chuck to a M14 polishing
backing pad. Eg.
SPC00106.
DEFINITION:
M - ISO metric screw thread.
....
R 65.03
Ex VAT:R 56.55
New Expected Date :
- 15/02/2025
Stock: 264
Model: SPC00054
UPC: 6009515825249
Adaptor for a polisher
Thread: 5/8" UNC Female - M14 Male
Application:
The adaptor is used to extend the spindle shaft on a polisher. Some adaptors
have different threads on either end. These adaptors are mostly used to change an
imperial thread to a metric thread.
DEFINITION:
M - ISO metric screw thread.
....
R 78.26
Ex VAT:R 68.05
Stock: 69
Model: SPC00101
UPC: 6009515816476
Compounding sponge
Pattern: Standard
Density: Firm
Colour: Orange
Diameter: Ø200mm
Thread/Hook & Loop: Hook & Loop
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
The panel has been newly painted with a clear-coat.
Shallow scratch marks need to be removed.
The panel has suffered from oxidation.
Swirl marks and hologram defects need to be removed.
Compounding sponge uses:....
R 345.58
Ex VAT:R 300.50
Stock: 28
Model: SPC00102
UPC: 6009515816483
Compounding sponge
Pattern: Standard
Density: Soft
Colour: Red
Diameter: Ø200mm
Thread/Hook & Loop: Hook & Loop
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
The panel has been newly painted with a clear-coat.
Shallow scratch marks need to be removed.
The panel has suffered from oxidation.
Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
....
R 323.21
Ex VAT:R 281.05
Stock: 178
Model: SPC00103
UPC: 6009515816490
FOAM PAD BLACK FINISHING PAD SPONGE 200MM 8"....
R 323.21
Ex VAT:R 281.05
Stock: 1470
Model: SPC00104
UPC: 6009515816469
Microfiber cloth
Application:
The cloth is called a microfiber cloth, because the fibers in the cloth are
sometimes 100 times thinner than a human hair.
A microfiber cloth cleans better than a regular cloth, because it has a lot more
smaller fibers. These small fibers attach themselves to even the smallest
most microscopic dirt particles. It is important to wash the cloths thoroughly
after use to get rid of every piece of dirt.
NOTE:
We recommend that the
microfiber c..
R 51.12
Ex VAT:R 44.45
Stock: 223
Model: SPC00109
UPC: 6009515819224
DA SANDER PAD PSA 5 16 - 24UNF MED SOFT 150MM 6"....
R 230.86
Ex VAT:R 200.75
In Stock Soon
Stock: In Stock Soon
Model: SPC00110
UPC: 6009515819231
DA SANDER PAD HOOK AND LOOP 5 16 - 24UNF MED SOFT NO HOLES 150MM 6"....
R 254.78
Ex VAT:R 221.55
New Expected Date :
- 17/01/2025
Stock: 333
Model: SPC00117
UPC: 6009515819408
BACKING PAD 100MM X M14 FOR STONE POLISHING....
R 237.76
Ex VAT:R 206.75
Stock: 96
Model: SPC00119
UPC: 6009515825140
Backing pad
Polishing backing pad with M14 thread.
For concave wool bonnets.
DIA: 150mm (6")
HOLES: No
THREAD: M14
hook and loop: Yes with offset
Application:
This is a replacement backing pad for a polisher with M14 fastening thread.
There is a hook and loop offset to minimise damage from the sharp hook and loop edge.
The
backing pad is ideal for concave polishing bonnets.
Attention:
Wear eye, face and body protection....
R 301.99
Ex VAT:R 262.60
Stock: 269
Model: SPC00123
UPC: 6009515825195
hook and loop polishing wool buff
Diameter: Ø125mm
Use backing pad:
SPC00120
Application:
The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened
onto a rubber backing pad with hook and loop. Make sure the diameter of the polishing buff is
the same as the backing pad&s diameter.
It is necessary to polish a vehicle body panel when:
The panel has been newly painted with a c....
R 152.15
Ex VAT:R 132.30
Stock: 394
Model: SPC00124
UPC: 6009515825201
Compounding sponge
Pattern:
Standard
Density: Firm
Colour: Blue
Diameter: Ø125mm
Thread/hook and loop: hook and loop
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
The panel has been newly painted with a clear-coat.
Shallow scratch marks need to be removed.
The panel has suffered from oxidation.
Swirl marks and hologram defects need to be removed.
Compounding sponge u....
R 141.68
Ex VAT:R 123.20
In Stock Soon
Stock: In Stock Soon
Model: SPC00206
UPC: 6009515859619
FOAM PAD HOOK AND LOOP GREEN SPONGE 150MM 6" LIGHT FINISHING....
R 111.72
Ex VAT:R 97.15
New Expected Date :
- 27/11/2024
- 15/02/2025
Stock: 344
Model: SPC00208
UPC: 6009515859633
FOAM PAD HOOK AND LOOP WHITE SPONGE 150MM 6" CUTTING....
R 134.21
Ex VAT:R 116.70
Stock: 2
Model: SSB402DZ
UPC: 012373430049
SCROLL SAW BL. 5" 125MM 25TPI WOOD PLAIN END 6PC....
R 235.64
Ex VAT:R 204.90
Stock: 22
Model: SSB41201
UPC: 012373412014
Scroll saw blades pinned
Pinned blades 127mm (5") for a scroll saw.
LENGTH:
127mm
(5") between pins
TPI: 10
PINS: Yes
Application:
The blades are manufactured to be used with scroll saws.
There are various
blade types available in the range with different teeth styles for different
uses.
A minimum pilot hole of 4.7mm is required for cut-outs.
Take a look at the chart below to select the correct blade for the recommended
material and thickness.
Scroll saw blade se..
R 206.20
Ex VAT:R 179.30
Stock: 53
Model: SSB46500
UPC: 012373465003
SCROLL SAW BL. 5" 125MM 36TPI SPIRAL CUT WOOD PLAIN END 6PC....
R 219.36
Ex VAT:R 190.75
Stock: 36
Model: SSB47600
UPC: 012373476009
JEWELERS METAL PIERCING SAW BLADES 56TPI PLAIN END 6PC....
R 193.43
Ex VAT:R 168.20
Stock: 8
Model: SSB47800
UPC: 012373478003
Jewelers metal piercing saw blades
127mm
(5") blades to be used with hand held frames only.
LENGTH:
127mm (5")
TPI: 51
Application:
These premium quality blades are made of hardened and tempered steel for sawing
metal and other hardened materials. All the blades are 127mm long and have
regular teeth and are commonly used by jewelers.
DEFINITION:
TPI - Teeth per inch. The amount of teeth measured between 25.4mm
Jeweler& saw sold seperately.....
R 273.53
Ex VAT:R 237.85
Stock: 18
Model: SSB47900
UPC: 012373479000
JEWELERS METAL PIERCING SAW BLADES 48TPI PLAIN END 6PC....
R 193.43
Ex VAT:R 168.20
Stock: 18
Model: SSB48700
UPC: 012373487005
Metal cutting scroll saw blades
127mm (5") blades to be used to cut metal with a scroll saw.
LENGTH:
127mm (5")
TPI: 25
PINS: No
Application:
These are high quality blades for precise cutting of thin metals up to 3mm
(1/8") thick and for other hard, non-metallic materials.
DEFINITION:
TPI - Teeth per inch. The amount of teeth measured between 25.4mm....
R 273.53
Ex VAT:R 237.85
Stock: 11
Model: SSB63507
UPC: 01237363507
SCROLL / FRET SAW FRAME 250MM DEEP 5" PLAIN END BLADE....
R 778.49
Ex VAT:R 676.95
Stock: 12
Model: SSB91212BL
UPC: 012373912125
SCROLL SAW SANDER 5" 125MM X 1/4" 120G PIN END 4PC....
R 323.44
Ex VAT:R 281.25
Stock: 8
Model: SSB91222BL
UPC: 012373912224
SCROLL SAW SANDER 5" 125MM X 1/4" 220G PIN END 4PC....
R 323.44
Ex VAT:R 281.25
Stock: 21
Model: SSB91512BL
UPC: 01237391512
SCROLL SAW SANDER 5" 125MM X 1/2" 120G PIN END 4PC....
R 323.44
Ex VAT:R 281.25
Stock: 20
Model: SSB91518BL
UPC: 098666915189
SCROLL SAW SANDER 5" 125MM X 1/2" 180G PIN END 4PC....
R 323.44
Ex VAT:R 281.25
Stock: 18
Model: SSB91522BL
UPC: 012373915225
SCROLL SAW SANDER 5" 125MM X 1/2" 220G PIN END 4PC....
R 323.44
Ex VAT:R 281.25
Stock: 33
Model: SSB92212BL
UPC: 012373922124
SCROLL SAW SANDER 5" 125MM X 1/4" 120G PLAIN END 4PC....
R 323.44
Ex VAT:R 281.25
Stock: 4
Model: ST AB16
UPC: 5060082781278
DBB
Morticer Cutters for
Aluminium Door Lock Installation
Size: 16.2mm (5/8")
The DBB Morticer, manufactured by Souber Tools, produces a perfect lock recess
every time. It is a genuine 5 minute morticer which is acclaimed by locksmiths and
builders alike.
Highlight
Older generation snap-on type cutter. With these specially designed cutters,
aluminium doors present no problems for the solidly constructed DBB Morticer.
Click to see the Jig
For easy installation of locks i..
R 1,399.84
Ex VAT:R 1,217.25
Stock: 14
Model: ST CWB13
UPC: 5060082784934
CARBIDE TIPPED CUTTER 13.2MM /LOCK MORTICER FOR WOOD SCREW TYPE....
R 717.66
Ex VAT:R 624.05
Stock: 15
Model: ST CWB24
UPC: 5060082785573
CARBIDE TIPPED CUTTER 24MM /LOCK MORTICER FOR WOOD SCREW TYPE....
R 924.60
Ex VAT:R 804.00
Stock: 2
Model: ST DBB-HK-O
UPC: 5060082781834
DBB
Morticer Accessories
Offset Adapter
The
DBB Morticer, manufactured by Souber Tools, produces a perfect lock recess every
time. It is a genuine 5 minute morticer which is acclaimed by locksmiths and builders
alike.
Highlights
Available as a complete kit, or as an upgrade for your standard morticer, this
attachment has been developed for European-style rebated doors with off-centre lock mortices.
Using
the same vertical bar & clamp system, the attachment has a side slid....
R 2,087.65
Ex VAT:R 1,815.35
Stock: 1
Model: ST DBB-SS
UPC: 5060082781957
DBB
Morticer Spare Parts
Shaft- Old Type
Highlight
Spare shaft for the DBB Morticer by Souber Tools. This item is the snap-on type
shaft for the older generation cutters.....
R 2,140.96
Ex VAT:R 1,861.70
Out Of Stock
Stock: Out Of Stock
Model: ST NAB19
UPC: 5060082785672
DBB
Morticer Cutters for
Aluminium Door Lock Installation
Size: 19mm (3/4")
The DBB Morticer, manufactured by Souber Tools, produces a perfect lock recess
every time. It is a genuine 5 minute morticer which is acclaimed by locksmiths and
builders alike.
Highlight
With specially designed cutters, aluminium doors
present no problems for the solidly constructed DBB
Morticer.
Four available cutter sizes provide you with all the range
you need to cut a lock slot in an aluminium d..
R 638.48
Ex VAT:R 555.20
Stock: 7
Model: ST NAB25
UPC: 5060082785689
DBB
Morticer Cutters for
Aluminium Door Lock Installation
Size: 25mm (1")
The DBB Morticer, manufactured by Souber Tools, produces a perfect lock recess
every time. It is a genuine 5 minute morticer which is acclaimed by locksmiths and
builders alike.
Highlight
With specially designed cutters, aluminium doors
present no problems for the solidly constructed DBB
Morticer.
Four available cutter sizes provide you with all the range
you need to cut a lock slot in an aluminium doo..
R 788.79
Ex VAT:R 685.90
Stock: 5
Model: ST PD23
UPC: 5060082785719
DBB
Morticer Plunge Cutters
Size: 23mm
The
DBB Morticer, manufactured by Souber Tools, produces a perfect lock recess every
time. It is a genuine 5 minute morticer which is acclaimed by locksmiths and builders
alike.
Highlight
These new cutters are ideal for installers who need perfectly drilled true holes.
Ideal for the quick installation of Tubular Latches, Deadbolts, Concealed Door Closers
etc. The range of 4 sizes of ‘Plunging Cutters’ are designed for locks where perfect ..
R 575.69
Ex VAT:R 500.60
Stock: 3
Model: ST WB20
UPC: 5060082784989
DBB
Morticer Wood Cutters
Size: 20mm
The DBB Morticer, manufactured by Souber Tools, produces a perfect lock recess
every time. It is a genuine 5 minute morticer which is acclaimed by locksmiths and
builders alike.
For anyone who regularly fits mortice locks it will prove invaluable
- an accurate, speedy and professional tool that will save time and money.
This is the older style hex shank snap on type cutter. This cutter can only
be used on wood and will not work on other m..
R 1,219.81
Ex VAT:R 1,060.70
Stock: 3
Model: ST WB32
UPC: 5060082785061
DBB
Morticer Wood Cutters
Size: 31,8mm
The DBB Morticer, manufactured by Souber Tools, produces a perfect lock recess
every time. It is a genuine 5 minute morticer which is acclaimed by locksmiths and
builders alike.
For anyone who regularly fits mortice locks it will prove invaluable
- an accurate, speedy and professional tool that will save time and money.
This is the older style hex shank snap on type cutter. This cutter can only
be used on wood and will not work on other..
R 1,229.93
Ex VAT:R 1,069.50
Stock: 1
Model: ST101250
UPC: 5060082785481
DBB
Morticer
Long Drill Size: 10mm x 1250mm
The DBB Morticer, manufactured by Souber Tools, produces a perfect lock recess
every time. It is a genuine 5 minute morticer which is acclaimed by locksmiths and
builders alike.
Highlight
The long drill bit is used in conjunction with the long drill kit.
After cutting the lock mortice, the long drill adapter
kit converts
the DBB morticer into a guide for a long drill
system.
Special geometry helps to keep the drill
"on li..
R 1,138.62
Ex VAT:R 990.10
Stock: 620
Model: T BH03100A
UPC: 6009515863388
SOCKET ADAPTER 100MM UNIVERSAL 1/4" 1/4 SQ M 1/4 HEX M CARDED....
R 211.60
Ex VAT:R 184.00
Stock: 55
Model: T BH60C
UPC: 6009515826932
Magnetic bit holder
Hex
shank: 6.35mm (1/4")
Length: 60mm
Packaging: Carded 1
Application:
The bit holder is used with all hex shank 6.35mm bits. The bit holder features a
magnet to keep the bit in place and to assist with holding screws when
screwdriving.
The shank is compatible with the Snap-it! Quick change connectors:
TZ AC33A - Snap-it! Quick change connector
TZ AC33B - Snap-it! Quick change connector....
R 120.92
Ex VAT:R 105.15
In Stock Soon
Stock: In Stock Soon
Model: T BH75C
UPC: 6009675082377
MAGNETIC BIT HOLDER 75MM CARDED....
R 128.11
Ex VAT:R 111.40
New Expected Date :
- 04/12/2024
- 30/12/2024
- 15/03/2025
Stock: 681
Model: T DE PZ0265B
UPC: 6009515878924
Double-ended bit
Pozidrive
Tip #: 2
Hex shank: 6.35mm (1/4")
Length: 65mm
Packaging: Bulk
Application:
The tips have been hardened to be used with high torque power tools. The shank
is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder.
The shank is compatible with the following bit holders:
T 938001 - Magnetic screwdriver bit holder.
TCFS200 - Flexible shaft bit holder.
T BH54C - Magnetic bit holder and extension 54mm (carded).
T ..
R 18.75
Ex VAT:R 16.30