Stock: 7
Model: KP53800
UPC: 6009675088812
Finger grip bit
Carbide
Tipped
This finger grip router bit produces clean and modern cabinet, kitchen door and chest
pulls, totally uninterrupted by hardware providing a positive grip that is easy on the
fingers. A must-have in any cabinetmaker’s workshop.
Eliminate hardware!
This router bit is a one-pass cutter. Best results will be achieved in a router table
setup. Great results can also be achieved using template-guide equipped handheld routers.
This router bit h..
R 532.80
Ex VAT:R 463.30
Stock: 5
Model: KP546
UPC: 6009600401907
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment during assembly and adds a greater glue surface, resulting in a stronger joint.
The cutter is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft) that wil....
R 1,398.86
Ex VAT:R 1,216.40
Stock: 14
Model: KP5503
UPC: 6009600403147
Face
Mould router bit
Decorative profile
Give your furniture and cabinets a classic, architectural look with this unique
molding router bit. Perfect for chair rails, crown molding, door casings, trim,
pilasters, window casing/sills, baseboards and picture frames, you can use the full
profile, or just a portion of it to achieve the look you want.
The timber is held securely against the bearing and the bit makes the cut. This
leaves you free to feed the timber steadily - and yo..
R 1,463.78
Ex VAT:R 1,272.85
Stock: 12
Model: KP551-1
UPC: 6009600401921
Spare arbor
Router
bit spare part
The arbor is a spare part for the rail and stile cutter
KP551
Bearing KP551-6 is included.....
R 228.62
Ex VAT:R 198.80
Stock: 21
Model: KP551-2
UPC: 6009600404762
SLOT CUTTER 4MM FOR KP551 OR KP851....
R 258.35
Ex VAT:R 224.65
Stock: 9
Model: KP551-3
UPC: 6009600404779
Spare cutter
Router
bit spare part
This ogee cutter cuts 12.7mm instead of the 9.5mm standard and is compatible
with
KP551 and
KP851.....
R 471.44
Ex VAT:R 409.95
Stock: 17
Model: KP551-5
UPC: 6009600404755
Spare cutter
Router
bit spare part
This ogee cutter cuts 9.5mm and is the standard cutter supplied with
KP551 and
KP851.....
R 436.48
Ex VAT:R 379.55
Stock: 63
Model: KP551-6
UPC: 6009600402245
Bearing
Router
bit spare part
The bearing is compatible with
KP551 and
KP851.....
R 138.17
Ex VAT:R 120.15
Stock: 10
Model: KP551-8
UPC: 6009600409477
Slot cutter
Router
bit spare part
The slot cutter cuts 6.35mm in width and is compatible with
KP551 and
KP851.....
R 306.42
Ex VAT:R 266.45
Stock: 12
Model: KP570821
UPC: 6009515839512
4
Wing Slot Cutter
Replacement blade
For
4-Wing carbide tipped
Four-wing slot cutters are convenient where higher feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP4301
PRO-TECH
router bits are manufactured in Taiwan.....
R 438.55
Ex VAT:R 381.35
Stock: 22
Model: KP570831
UPC: 6009515839345
4
Wing Slot Cutter
Replacement blade
For
4-Wing carbide tipped
Four-wing slot cutters are convenient where higher feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP4301
PRO-TECH
router bits are manufactured in Taiwan.....
R 434.36
Ex VAT:R 377.70
Stock: 12
Model: KP570851
UPC: 6009515809881
4
Wing Slot Cutter
Replacement blade
For
4-Wing carbide tipped
Four-wing slot cutters are convenient where higher feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP4301
PRO-TECH
router bits are manufactured in Taiwan.....
R 438.55
Ex VAT:R 381.35
Stock: 18
Model: KP580091
UPC: 6009600406704
Bearing
Router
bit spare part
Bearing dimensions:
Unit
Outside diameter
Inside diameter
Imperial
Ø 3/4 inch
Ø 1/2 inch
Metric
Ø 19.02mm
Ø 12.7mm....
R 202.69
Ex VAT:R 176.25
Stock: 28
Model: KP5901
UPC: 6009600401938
Multi-bead
Carbide
Tipped
This
router bit is used for creating a single bead (also referred to as a reed) with
fillets and a rounded edge with the same radius to give a classic rounded off finish
in one pass.
Control cut design helps minimize kickback
Smooth edge requires little or no sanding before applying a finish
This router bit has a
6,35mm shank (shaft) that will fit most small or large routers.
Please ensure that you select a router bit with a shank (shaf..
R 752.50
Ex VAT:R 654.35
Stock: 10
Model: KP604411-21
UPC: 6009600401952
Glue joint set
Carbide
Tipped - Wedge glue joint
The cutter set contains both the groove and tongue cutters to create a wedge
glue joint. The wedge profile assists with alignment during assembly and adds a
greater glue surface, resulting in a stronger joint.
The cutter set is designed to be used in a router table.
This router bits have a 12.7mm shank (shaft) that will fit most large routers with the correct collet. Please ensure that you select a router bit with a sh....
R 2,671.68
Ex VAT:R 2,323.20
Stock: 21
Model: KP609011-1
UPC: 6009600409002
Spare
cutter (slot cutter)
Router bit spare part
The slot cutter is compatible with the following cutters:
KP609011
KP609411
KP851
KP551....
R 221.66
Ex VAT:R 192.75
Stock: 8
Model: KP686
UPC: 6009600401983
25 Degree Raised Panel bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
grain, and a wide panel made of solid wood could change width by up to 6mm,
warping the door frame.
By allowing the wood panel to float, it can expand and contract without
damaging the door. A typi..
R 1,526.11
Ex VAT:R 1,327.05
Stock: 11
Model: KP689
UPC: 6009600401990
Ogee Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
grain, and a wide panel made of solid wood could change width by up to 6mm,
warping the door frame.
By allowing the wood panel to float, it can expand and contract without
damaging the door. A ty..
R 1,468.78
Ex VAT:R 1,277.20
Stock: 26
Model: KP6MM L
UPC: 6009600404526
Two
flute Metric Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead to tool breakage.
Use
a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating
vibration that degrades the cut finish.
Two cuts per revolut..
R 202.46
Ex VAT:R 176.05
Stock: 19
Model: KP7004-1
UPC: 6009600406346
Biscuit
Slot Cutter
Replacement bearing guide
For
Biscuit No. 20
The biscuit slot cutter comes in handy when one does not have access to a
biscuit joiner.
Our Pro-Tech four-wing cutter design allows for cutting precise slots for No. 0, No.
10 and No. 20 biscuits. The bearing guide needs to be replaced with a different size in order
to accommodate the different sizes of biscuits.
PRO-TECH
router bits are manufactured in Taiwan.....
R 135.53
Ex VAT:R 117.85
In Stock Soon
Stock: In Stock Soon
Model: KP7004-3
UPC: 6009600406315
Biscuit
Slot Cutter
Replacement bearing guide
For
Biscuit No. 0
The biscuit slot cutter comes in handy when one does not have access to a
biscuit joiner.
Our Pro-Tech four-wing cutter design allows for cutting precise slots for No. 0, No.
10 and No. 20 biscuits. The bearing guide needs to be replaced with a different size in order
to accommodate the different sizes of biscuits.
PRO-TECH
router bits are manufactured in Taiwan.....
R 135.53
Ex VAT:R 117.85
New Expected Date :
- 15/01/2025
In Stock Soon
Stock: In Stock Soon
Model: KP7004-4
UPC: 6009600409262
Biscuit
Slot Cutter
Replacement shaft
For
Biscuit slot cutter KP7005
The biscuit slot cutter comes in handy when one does not have access to a
biscuit joiner.
Our Pro-Tech four-wing cutter design allows for cutting precise slots for No. 0, No.
10 and No. 20 biscuits. The bearing guide needs to be replaced with a different size in order
to accommodate the different sizes of biscuits.
PRO-TECH
router bits are manufactured in Taiwan.....
R 184.23
Ex VAT:R 160.20
New Expected Date :
- 15/01/2025
Stock: 3
Model: KP7004-5
UPC: 6009515805296
Biscuit
Slot Cutter
Replacement blade
For
Biscuit slot cutter KP7004 & KP7005
The biscuit slot cutter comes in handy when one does not have access to a
biscuit joiner.
Our Pro-Tech four-wing cutter design allows for cutting precise slots for No. 0, No.
10 and No. 20 biscuits. The bearing guide needs to be replaced with a different size in order
to accommodate the different sizes of biscuits.
PRO-TECH
router bits are manufactured in Taiwan.....
R 364.72
Ex VAT:R 317.15
Stock: 22
Model: KP702
UPC: 6009600402034
90°
V-groove router bit
Carbide
Tipped
V-groove router bits have many uses. One particular application is in carving lettering and other decorative signage.
In the drywalling industry this router bit is used to cut a 90 degree v-groove in the drywall sheet almost through the board. The board is then bent to form a neat 90 degree corner.
This router bit has a
6,35 mm shank (shaft) that will fit most small routers. Please
ensure that you select a router bit with a shank....
R 358.80
Ex VAT:R 312.00
Stock: 21
Model: KP708010
UPC: 6009600403192
Spindle
cutter - 3 lip classic bead
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft.
The cutter can be configured to cut quarter rounds and coves
KP800020 - 3/4" - 1/2" spacer rings
Important:
Make sure the spindle moulder has a table opening of at least Ø
140mm.
Designed for spindle moulders equipped with either a 1/2" or 3/4"
spindle sha....
R 1,780.66
Ex VAT:R 1,548.40
Stock: 30
Model: KP800020
Spacer
bushings
Spindle moulder cutter spacers
Use the spacer bushings to adapt a Ø 3/4" bore cutter to fit on a Ø
1/2" bore spindle shaft.....
R 58.42
Ex VAT:R 50.80
Stock: 4
Model: KP846
UPC: 6009600402126
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment during assembly and adds a greater glue surface, resulting in a stronger joint.
The cutter is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that wil....
R 1,521.05
Ex VAT:R 1,322.65
Stock: 19
Model: KP847
UPC: 6009600403949
LOCK MITRE BIT 1/4" SHANK....
R 1,521.05
Ex VAT:R 1,322.65
Stock: 9
Model: KP851-1
UPC: 6009600403703
Spare arbor
Router
bit spare part
The arbor is a spare part for the rail and stile cutter
KP851
Bearing KP551-6 is included.....
R 202.80
Ex VAT:R 176.35
Stock: 141
Model: KP8MM
UPC: 6009600402195
Two
flute Metric Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead to tool breakage.
Use
a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating
vibration that degrades the cut finish.
Two cuts per revolut..
R 188.20
Ex VAT:R 163.65
Stock: 14
Model: KP906
UPC: 6009600409460
Edge
profile router bits
Bevel profile
Carbide
Tipped
This bevel cutter is a 2 flute, carbide tipped router bit with totally enclosed ball
bearing guide. It is ideal for bevelling and decorative edges. This router bit is also
used for producing a 45° edge for mitres, especially where extreme accuracy is required.
A great product for making boxes.
This router bit has a
12.7mm shank (shaft) that will fit most large routers with the correct collet. Please
ensure that yo..
R 1,280.18
Ex VAT:R 1,113.20
Stock: 15
Model: KPCF-02A
UPC: 6009600403963
Cabinet
door set 2 PC
Cabinet door set - Ogee and bevel profile
The set is designed to be used in a router table to create a cabinet door.
Rail & stile profile router bit
Panel raise router bit
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft)
that will fit most large routers with the correct collet. Please ensure that
you select a router bit with a shank (shaft) size that will fit into your router ....
R 3,817.20
Ex VAT:R 3,319.30
Out Of Stock
Stock: 5
Model: KPFJ-02
UPC: 6009600402270
Spare
blade
Router bit spare part
The cutter blade can be used as a spare blade for the KPFJ-01 finger
jointer or it can be added to the stack of finger jointer blades to have a
total of 4 blades.....
R 1,047.48
Ex VAT:R 910.85
Stock: 13
Model: KPS6105
UPC: 6009600403215
Radiused Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
grain, and a wide panel made of solid wood could change width by up to 6mm,
warping the door frame.
By allowing the wood panel to float, it can expand and contract without
damaging the door. ..
R 1,309.68
Ex VAT:R 1,138.85
Out Of Stock
Stock: Out Of Stock
Model: KR DECKDRIVER
UPC: 647096802127
Deck Jig™ Driver Bit Set
Add a second driver bit to your Kreg® Deck Jig™ Concealed-Fastening System or replace a worn or broken bit with this set.
The set contains the same high-quality driver that is included with the Deck Jig, along with a stop collar and hex wrench. #1 KTX drive, hex shank fits all standard 1/4" chucks.....
R 223.68
Ex VAT:R 194.50
Stock: 2
Model: KR KBS1010
UPC: 647096803032
20" Rail Set
Universal Bench Rail Sets are sold in sets of four so you can customize your bench to fit your space, your projects, and your needs
Universal Bench Rail Sets are available in five options to accommodate a wide variety of projects needs: 14", 20", 28", 44", and 64". That means you can create a custom Universal Bench in 30 possible sizes, from 14" x 14" to 64" x 64".
Made from heavy-duty, 16-gauge steel, these durable rails are built to last for..
R 1,181.45
Ex VAT:R 1,027.35
Stock: 3
Model: KR KHI-PULL-INT
UPC: 647096807351
Cabinet Hardware Jig
Install knobs and pulls with easy, repeatable accuracy
The Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls. The moveable edge guide and measuring scales make it easy to position knobs precisely, while adjustable drill guides ensure straight holes for perfect knob and pull positioning every time.
Perfect for new construction and for refreshing entire rooms.
Whether you&re updating your cabinets o..
R 892.17
Ex VAT:R 775.80
Stock: 46
Model: KR KJDHD
UPC: 647096802813
Kreg Jig® HD Drill Bit
The Kreg Pocket-Hole Jig HD (Heavy-Duty) Drill Bit was made specifically for Kreg Joinery™ and exclusive use with the Kreg Pocket-Hole Jig HD. It features a 1/4" (6mm) hex shank, Kreg® Quick-Change Chuck compatibility, and drills a 1/2" (12mm) diameter pocket hole.
For exclusive use with the Kreg Pocket-Hole Jig HD. This bit is not compatible with the Foreman Pocket-Hole Machine (Item# DB210).....
R 945.70
Ex VAT:R 822.35
Stock: 6
Model: KR KJSCD
UPC: 647096326111
Depth Collar & Allen Wrench for Stepped Drill Bit
Rugged depth collar and Allen wrench
Works with any 3/8"-diameter stepped Kreg drill
bit
Designed to control depth of the drill bit
For use with any manual Kreg Jig®
This rugged depth collar and Allen wrench works with any 3/8"-diameter
stepped Kreg drill bit. It was specifically designed for controlling the depth
of your drill bit when drilling standard pocket holes with any manual Kreg Jig®.....
R 101.66
Ex VAT:R 88.40
Stock: 6
Model: KR KJSS
UPC: 647096211165
Material Support Stop
This handy Kreg Pocket-Hole Jig accessory can be positioned any distance from your Pocket-Hole Jig K3, K4, or K4 Master System to create a workpiece support and stop that lets you repeat the same pocket hole over and over again. The stop can also be swung out of the way to serve as a support for large panels.
For use with the K3, K4, or K4 Master System. Does not work with the Pocket-Hole Jig K5.....
R 327.12
Ex VAT:R 284.45
Stock: 36
Model: KR KMA2685-INT
UPC: 0647096807184
Rip-Cut™
Turn an ordinary circular saw into a precision edge-guided cutting tool
Great projects start with high-quality cuts, and you can make those cuts — more easily than you ever imagined — using your circular saw plus the Rip-Cut™ Circular Saw Edge Guide.
The Kreg® Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cu..
R 1,463.15
Ex VAT:R 1,272.30
In Stock Soon
Stock: In Stock Soon
Model: KR KMA2699
UPC: 0647096807245
Accu-Cut™ Replacement Guide Strips
Accu-Cut™ Replacement Guide Strips allow you to easily replace the original strips on your Accu-Cut™, Accu-Cut™ XL, or Accu-Cut™ Expansion Pack. If the strips ever get damaged, worn, or you switch to a different circular saw that requires a different setup, just peel off your old Guide Strips, and stick the new ones in place using the attached adhesive strip.
Includes two of the same thick, durable, anti-slip strips that come wi..
R 435.85
Ex VAT:R 379.00
New Expected Date :
- 15/01/2025
Stock: 48
Model: KR KMA2700
UPC: 0647096807177
Accu-Cut™
Transform your circular saw into a high-performance, track-guided cutting tool
Start projects right by making straight, accurate, splinter-free cuts with your circular saw and the Accu-Cut™ Circular Saw Track Guide. It rips, crosscuts and makes angled cuts up to 50" long in plywood, MDF, and other large panels with super-simple setup, precise accuracy, and amazing control.
The Accu-Cut™ guides your circular saw along an aluminum track that keeps t..
R 2,989.37
Ex VAT:R 2,599.45
Stock: 2
Model: KR KMS7215
UPC: 647096524166
Micro Adjuster
Dial-in precise adjustments to your Kreg® Precision Band Saw Fence – down to .005" (0.127mm) – with the simple turn of a thumb wheel.....
R 755.38
Ex VAT:R 656.85
Stock: 38
Model: KR KPC1040
UPC: 647096806781
Custom Plug Cutting Bit - Micro
The Custom Plug Cutting Bit works with the Custom Pocket-Hole Plug Cutter to create plugs that perfectly match your project. This specially designed bit chucks into any drill, and fits into the hardened-steel drill guide in the Plug Cutter to produce plugs in the correct diameter to fit Micro-Pocket™ pocket holes.....
R 1,421.52
Ex VAT:R 1,236.10
Stock: 11
Model: KR KSS-L
UPC: 0647096806620
Hardware Container
Store and organize Kreg Screws and other hardware in the shop and on the go
Kreg Hardware Containers are the perfect solution for storing and organizing all kinds of loose hardware. These handy containers are the same durable, resealable, reusable containers that are used to package Kreg Screws.
Hardware Containers have lids with a surface that you can write on to easily identify what’s stored inside. Available in Small and Large sizes, H..
R 355.70
Ex VAT:R 309.30
Stock: 8
Model: KR PRS1045
UPC: 647096805388
Precision Router Table System
Unmatched versatility, incredible adjustability
The Kreg Precision Router Table System combines unmatched versatility with incredible adjustability and ease of setup to take your woodworking projects to the next level. This powerful system offers a large, durable table top, a one-of-a-kind T-square style fence, and a durable steel stand that work together to create a router table that meets all of your precision-routing needs.
..
R 19,203.05
Ex VAT:R 16,698.30
Stock: 4
Model: KR PRS1200
UPC: 647096801403
Precision Beaded Face-Frame System
The Fastest, Easiest, and Most Affordable Way to Build Beaded Face-Frames in a Home Shop
Beaded face frames are a great way add detail, richness, and value to your cabinetry work. The Precision Beaded Face-Frame System works in conjunction with your full-size router table to serve as the fastest, easiest, and most affordable way to build beaded face-frames in a home shop.
Through a process of precise notching of rails and ..
R 13,674.02
Ex VAT:R 11,890.45
Stock: 7
Model: KR PRS3020
UPC: 647096711177
True-FLEX™ Featherboard - Twin Pack
The True-FLEX™ Featherboard gets its name from the careful engineering that went into its design. Many Featherboards on the market today apply too much pressure or not enough pressure to the workpiece, which results in imperfect cuts and less than safe operation.
The True-FLEX™ Featherboard provides a consistent and optimum pressure, and will stand up to years of heavy use in your woodshop. The Featherboard is made from an extr..
R 1,489.25
Ex VAT:R 1,295.00