Stock: 1156
Model: TCDB20230
UPC: 6009675081240
Segmented Rim for building materials 230mm
PROFESSIONAL
For concrete, brick, concrete pavers, masonry/block, hard/reinforced
concrete, and limestone
Professional Series Diamond Blade with Segmented Rim for building materials.
Standard 22.23mm bore size to fit all makes of handheld angle grinders.
Segmented Rim blades give the roughest cut and is used for concrete, brick, concrete
pavers, masonry/block, hard/reinforced concrete, and limestone. This blade is usually
referred to as a ..
R 243.23
Ex VAT:R 211.50
Stock: 391
Model: TCDB20230-4
UPC: 6009515812591
Diamond blade
TYPE:
Segmented
DIAMETER: Ø230mm
BORE: Ø22.23mmmm
MAX RPM: 6,600
USE: Brick, concrete, cement block, granite, fiber cement,
tile, stucco, stone and other masonry materials.
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow....
R 328.56
Ex VAT:R 285.70
Stock: 195
Model: TCDB20230-5P
UPC: 6009515839888
Segmented Rim for building materials 230mm Bulk Pack
PROFESSIONAL
For concrete, brick, concrete pavers, masonry/block, hard/reinforced concrete, and limestone
Professional Series Diamond Blade with Segmented Rim for building materials. Standard 22.23mm bore size to fit all makes of handheld angle grinders.
Segmented Rim blades give the roughest cut and is used for concrete, brick, concrete pavers, masonry/block, hard/reinforced concrete, and limestone. This blade is usually referred to as ..
R 1,125.85
Ex VAT:R 979.00
Stock: 36
Model: TCDB20300-12
UPC: 6009515820152
DIAMOND BLADE 300 x 25.4MM OLD CONCRETE HOT PRESSED SEGMENTED....
R 1,092.85
Ex VAT:R 950.30
Stock: 29
Model: TCDB20300-16
UPC: 6009515820183
Diamond blade
TYPE:
Laser weld and segmented
DIAMETER: Ø300mm
BORE: Ø25.4mm
MAX RPM: 5,000
USE: Old concrete
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture of diamond powder an....
R 1,728.28
Ex VAT:R 1,502.85
Stock: 47
Model: TCDB20350-2
UPC: 6009515819729
Diamond blade
TYPE:
Laser weld and segmented
DIAMETER: Ø350mm
BORE: Ø25.4mm
MAX RPM: 4,300
USE: Green concrete
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture of diamond powder ....
R 2,151.94
Ex VAT:R 1,871.25
In Stock Soon
Stock: In Stock Soon
Model: TCDB20350-3
UPC: 6009515819712
DIA. BLADE 350x25.4MM OLD CONCRETE HOT PRESSED....
R 1,573.78
Ex VAT:R 1,368.50
New Expected Date :
- 03/01/2025
- 15/03/2025
Stock: 153
Model: TCDB20350-6
UPC: 6009515819743
Diamond blade
TYPE:
Laser weld and segmented
DIAMETER: Ø350mm
BORE: Ø25.4mm
MAX RPM: 4,300
USE: Asphalt
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture of diamond powder and met....
R 2,123.59
Ex VAT:R 1,846.60
Stock: 555
Model: TCDB40230
UPC: 6009675081257
DIAMOND BLADE 230MM TURBO WAVE PROFESIONAL....
R 336.84
Ex VAT:R 292.90
Stock: 229
Model: TCDB430230
UPC: 6009515802868
DIAMOND BLADE 230X22.22 TURBO/SEGM.LASER....
R 1,101.70
Ex VAT:R 958.00
Stock: 41
Model: TCDB50230-2
UPC: 6009515812577
DIAMOND BLADE MULTI PURP.SEGM.230MM HARD & SOFT MAT.....
R 292.73
Ex VAT:R 254.55
Stock: 729
Model: TCDB70115
UPC: 6009675088126
Diamond blade for metal cutting
TYPE:
Laser weld and segmented
DIAMETER: Ø115mm
BORE: Ø22.23mm
MAX RPM: 13,300
USE: Metal cutting
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture....
R 247.19
Ex VAT:R 214.95
Stock: 101
Model: TCDB70230-1
UPC: 6009515858773
Professional Series Diamond blade 230mm
INDUSTRIAL
For cutting ferrous and non-ferrous metals
Industrial grade vacuum brazed cutting disc for Metal Cutting. It is suitable
for both ferrous and non-ferrous metals. Segmented disc which helps to extract cutting
dust and cool the blade. These segments also offer the blade a little flexibility to prevent
cracks developing when used in demanding conditions.....
R 822.25
Ex VAT:R 715.00
Out Of Stock
Stock: Out Of Stock
Model: TCDB70300
UPC: 6009675088140
Diamond blade for metal cutting
TYPE:
Laser weld and segmented
DIAMETER: Ø300mm
BORE: Ø25.4mm
MAX RPM: 5,100
USE: Metal cutting
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture o....
R 1,322.33
Ex VAT:R 1,149.85
Stock: 2
Model: TCDB70350
UPC: 6009515824914
Diamond blade for metal cutting
TYPE:
Laser weld and segmented
DIAMETER: Ø350mm
BORE: Ø25.4mm
MAX RPM: 2,800
USE: Metal cutting
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture o....
R 1,469.41
Ex VAT:R 1,277.75
In Stock Soon
Stock: In Stock Soon
Model: TCDP10007
UPC: 6009515818975
TorkCraft - Wet Diamond Polishing Pad
Grit: #50 - 3000 (7 Piece)
Application:
The Tork Craft wet diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
Ideal for both contractors and DIY users.
Suitable for wet use.
Hook & Loop back for fast pad change.
Recommended Tork Craft backing pads SPC00117 100mm x M....
R 910.51
Ex VAT:R 791.75
New Expected Date :
- 27/11/2024
Stock: 107
Model: TCDP10050
UPC: 6009515824334
TorkCraft - Wet Diamond Polishing Pad
Grit: #50
Application:
The Tork Craft wet diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
Ideal for both contractors and DIY users.
Suitable for wet use.
Hook & Loop back for fast pad change.
Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
....
R 136.85
Ex VAT:R 119.00
Stock: 262
Model: TCDP10150
UPC: 6009515824341
TorkCraft - Wet Diamond Polishing Pad
Grit: #150
Application:
The Tork Craft wet diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
Ideal for both contractors and DIY users.
Suitable for wet use.
Hook & Loop back for fast pad change.
Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
....
R 134.21
Ex VAT:R 116.70
Stock: 128
Model: TCDP10500
UPC: 6009515824365
TorkCraft - Wet Diamond Polishing Pad
Grit: #500
Application:
The Tork Craft wet diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
Ideal for both contractors and DIY users.
Suitable for wet use.
Hook & Loop back for fast pad change.
Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
....
R 136.85
Ex VAT:R 119.00
Stock: 126
Model: TCDP20150
UPC: 6009515863586
TorkCraft - Dry Use Diamond Polishing Pad
Grit: #150
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
Ideal for both contractors and DIY users.
Suitable for wet use.
Hook & Loop back for fast pad change.
Recommended Tork Craft backing pads SPC00117 100mm x M14 or SP....
R 263.29
Ex VAT:R 228.95
Stock: 142
Model: TCDP20300
UPC: 6009515863593
TorkCraft - Dry Use Diamond Polishing Pad
Grit: #300
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
Ideal for both contractors and DIY users.
Suitable for wet use.
Hook & Loop back for fast pad change.
Recommended Tork Craft backing pads SPC00117 100mm x M14 or SP....
R 263.29
Ex VAT:R 228.95
Stock: 435
Model: TCDS
UPC: 6009600404168
Drum sanding kit....
R 242.65
Ex VAT:R 211.00
Stock: 214
Model: TCDS25180
UPC: 6009515802677
25.4mm drum sanding sleeves
Drum sanding sleeves to use with drum sanding
arbor.[click
here]
SIZE: Ø 25.4mm
GRIT: P180
These sleeves fit onto arbor code
TCDS25....
R 54.51
Ex VAT:R 47.40
Stock: 7
Model: TCE16048
UPC: 6009675084586
BLADE EURO TIP 160X48T 20/16MM....
R 698.68
Ex VAT:R 607.55
Stock: 21
Model: TCE16060
UPC: 6009515809164
BLADE TCT EURO TIP 160X60T 2OMM BORE WOOD CUTTING PROFESIONAL....
R 881.07
Ex VAT:R 766.15
Out Of Stock
Stock: Out Of Stock
Model: TCE30072
UPC: 6009675084647
BLADE TCT EURO TIP 300 X 72T 30/16MM PROFESSIONAL....
R 1,616.56
Ex VAT:R 1,405.70
Stock: 86
Model: TCE30572-30
UPC: 6009515877118
BLADE TCT EURO TIP 305 X 72T 30-1-20-16 PROFESSIONAL....
R 1,691.54
Ex VAT:R 1,470.90
Stock: 25
Model: TCE30596-30
UPC: 6009675086979
BLADE TCT EURO TIP 305 X 96T 30-1-20-16 PROFESSIONAL....
R 2,204.90
Ex VAT:R 1,917.30
Stock: 167
Model: TCFA0307
UPC: 6009515827052
Surface conditioning kit
To repair/recondition defects on surfaces using a
drill. Ideal for motorcycle bodywork repair.
SIZE: Ø75mm
Kit contains:
(x1) Backing pad
(x1) Arbor
(x3) Sanding discs
(x3) Fleece/non-woven discs....
R 474.66
Ex VAT:R 412.75
Stock: 700
Model: TCFA0702B
UPC: 6009675111152
Face off disc
Compatible with
115mm dia. angle grinders.
Application:
It is ideal for removing coatings on a variety of substrates, such as
wood,
metal and plastics.
The disc is incorporated with extruded nylon fibres, flexible resin technology
and extra-coarse abrasive grains.
Always make use of the necessary safety equipment when using machinery
or powertools!....
R 186.24
Ex VAT:R 161.95
Stock: 120
Model: TCFA0707
UPC: 6009675084487
Face off disc
For
use with a portable or stationary drill.
Dia:
Ø125mm
Application:
It is ideal for removing coatings on a variety of substrates, such as
wood,
metal and plastics.
The disc is incorporated with extruded nylon fibres, flexible resin technology
and coarse abrasive grains.
Always make use of the necessary safety equipment when using machinery
or powertools!....
R 237.76
Ex VAT:R 206.75
Stock: 63111
Model: TCFD115-120
UPC: 6009515801670
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø115
GRIT: P120
SURFACE : Flat
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.....
R 29.33
Ex VAT:R 25.50
Stock: 11723
Model: TCFD115-2-40
UPC: 6009675088157
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and finish in one operation.
SIZE: Ø115
GRIT: P40
SURFACE : 15° Conical
Apply light pressure when finishing welds. The flap disc is flexible and will tend to follow the contours of whatever you are grinding.....
R 28.87
Ex VAT:R 25.10
Stock: 6178
Model: TCFD115-2-80
UPC: 6009675088171
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø115
GRIT: P80
SURFACE :15° conical
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.....
R 28.87
Ex VAT:R 25.10
Stock: 2141
Model: TCFD115-3-120
UPC: 6009515801731
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø115
GRIT: P120
SURFACE : Flat
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.....
R 37.20
Ex VAT:R 32.35
In Stock Soon
Stock: In Stock Soon
Model: TCFD115-3-40
UPC: 6009515801700
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø115
GRIT: P40
SURFACE : Flat
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.....
R 37.20
Ex VAT:R 32.35
New Expected Date :
- 30/11/2024
- 15/02/2025
Out Of Stock
Stock: Out Of Stock
Model: TCFD115-3-40R
UPC: 6009515863456
FLAP DISC ROUND EDGE ZIRCONIUM 115MM 40 GRIT FLAT....
R 110.86
Ex VAT:R 96.40
Stock: 630
Model: TCFD115-3-80R
UPC: 6009515863470
FLAP DISC ROUND EDGE ZIRCONIUM 115MM 80 GRIT FLAT....
R 110.86
Ex VAT:R 96.40
In Stock Soon
Stock: In Stock Soon
Model: TCFD115-4-40
UPC: 6009515801540
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø115
GRIT: P40
SURFACE : 15° conical
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.
Wear eye, face, body and respiratory protection.....
R 37.20
Ex VAT:R 32.35
New Expected Date :
- 30/11/2024
- 15/02/2025
In Stock Soon
Stock: In Stock Soon
Model: TCFD115-4-80
UPC: 6009515801564
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø115
GRIT: P80
SURFACE : 15° conical
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.....
R 37.20
Ex VAT:R 32.35
New Expected Date :
- 30/11/2024
- 15/02/2025
Stock: 53155
Model: TCFD115-60
UPC: 6009600404519
Flap disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: Ø115
GRIT: P60
SURFACE : Flat
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.....
R 27.43
Ex VAT:R 23.85
Stock: 1093
Model: TCFD230-120
UPC: 6009515857226
FLAP SANDING DISC 230MM 120GRIT A/O....
R 161.40
Ex VAT:R 140.35
Stock: 1159
Model: TCFD230-60
UPC: 6009515857202
FLAP SANDING DISC 230MM 60GRIT A/O....
R 161.40
Ex VAT:R 140.35
Stock: 165
Model: TCGR100-2
UPC: 6009515819897
GRINDING WHEEL 100X50 M14 BORE - #36CUP - ANGLE GRINDER....
R 213.04
Ex VAT:R 185.25
Stock: 656
Model: TCGR150-11
UPC: 6009515833947
Grinding wheel for bench grinder
For use with bench grinders to grind steel
DIAMETER: Ø150mm
WIDTH: 20mm
BORE: Ø32mm
GRIT: 60
ABRASIVE: Silicon Carbide
MAX RPM: 3800
Application:
Ideal for workshops – re-sharpening of tools e.g. chisels etc. Maximised cut rate, wheel life and finish on High-Speed Steel (HSS), High Carbon Steel (HCS), cast iron and chilled steel
Deburring steel and thread rods.
Shaping of ferrous metals (carbon steel, steel, iro....
R 165.37
Ex VAT:R 143.80
Stock: 421
Model: TCGR150-2
UPC: 6009515816179
Grinding wheel for bench grinder
For use with bench grinders to grind all types of steel.
DIAMETER: Ø150mm
WIDTH: 25mm
BORE: Ø32mm
GRIT: 36
ABRASIVE: Aluminium oxide
MAX RPM: 3800
Application:
High-quality aluminium oxide abrasives
bonded and precision-engineered to maximize cut rate, wheel life and finish
on steel, stainless steel and cast iron.
Used for offhand deburring and sharpening parts and tools on a bench grinder.
Grinding wh....
R 165.37
Ex VAT:R 143.80
Stock: 18
Model: TCGR150-8
UPC: 6009515833916
Grinding wheel for bench grinder
For use with bench grinders to grind steel
DIAMETER: Ø150mm
WIDTH: 20mm
BORE: Ø32mm
GRIT: 36
ABRASIVE: Silicon Carbide
MAX RPM: 3800
Application:
Ideal for workshops – re-sharpening of tools e.g. chisels etc. Maximised cut rate, wheel life and finish on High-Speed Steel (HSS), High Carbon Steel (HCS), cast iron and chilled steel
Deburring steel and thread rods.
Shaping of ferrous metals (carbon steel, steel, iro....
R 165.37
Ex VAT:R 143.80
Stock: 53
Model: TCGR150-9
UPC: 6009515833923
Grinding wheel for bench grinder
For use with bench grinders to grind all tempered and hardened steel.
DIAMETER: Ø150mm
WIDTH: 20mm
BORE: Ø32mm
GRIT: 36
ABRASIVE: Aluminium oxide
MAX RPM: 3800
Application:
High-quality aluminium oxide abrasives
bonded and precision-engineered to maximise cut rate, wheel life and finish
on High-Speed Steel (HSS), High Carbon Steel (HCS), cast iron and chilled
steel.
Used for offhand grinding tempered and....
R 165.37
Ex VAT:R 143.80
Stock: 197
Model: TCGR200-2
UPC: 6009515816193
Grinding wheel for bench grinder
For use with bench grinders to grind all types of steel.
DIAMETER: Ø200mm
WIDTH: 25mm
BORE: Ø32mm
GRIT: 36
ABRASIVE: Aluminium oxide
MAX RPM: 2100
Application:
High-quality aluminium oxide abrasives
bonded and precision-engineered to maximize cut rate, wheel life and finish
on steel, stainless steel and cast iron.
Used for offhand deburring and sharpening parts and tools on a bench grinder.
Grinding wh....
R 296.18
Ex VAT:R 257.55
Stock: 131
Model: TCGR200-3
UPC: 6009515830250
Grinding wheel for bench grinder
For use with bench grinders to grind steel
DIAMETER: Ø200mm
WIDTH: 25mm
BORE: Ø32mm
GRIT: 36
ABRASIVE: Silicon Carbide
MAX RPM: 2100
Application:
Ideal for workshops – re-sharpening of tools e.g. chisels etc. Maximised cut rate, wheel life and finish on High-Speed Steel (HSS), High Carbon Steel (HCS), cast iron and chilled steel
Deburring steel and thread rods.
Shaping of ferrous metals (carbon steel, steel, iro....
R 296.18
Ex VAT:R 257.55