Stock: 207
Model: DR55035
UPC: 6009675089383
Double end stubby HSS
Drill diameter: Ø3.5mm
Packaging: Packet of 10
Point: 135° split point
Drill bit: HSS (Hi-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the adantage of reducing the
amount of pressure required to perform the cut.
The sturdy double end allows
for twice the usage making the drill bit more economic....
R 153.47
Ex VAT:R 133.45
Stock: 2
Model: DR55049
UPC: 6009675089437
Double end stubby HSS
Drill diameter: Ø4.9mm
Packaging: Packet of 10
Point: 135° split point
Drill bit: HSS (Hi-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the adantage of reducing the
amount of pressure required to perform the cut.
The sturdy double end allows
for twice the usage making the drill bit more economic....
R 277.61
Ex VAT:R 241.40
Stock: 373
Model: DR55060
UPC: 6009675089475
Double end stubby HSS
Drill diameter: Ø6.0mm
Packaging: Packet of 10
Point: 135° split point
Drill bit: HSS (Hi-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the adantage of reducing the
amount of pressure required to perform the cut.
The sturdy double end allows
for twice the usage making the drill bit more economic....
R 388.82
Ex VAT:R 338.10
Stock: 255
Model: DR60050
UPC: 6009515836788
HSS standard drill bit
Drill diameter: Ø5.0mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is roll forged.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will drill into steel, non-ferrous metals and plastic.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines to sharpen the HSS standard drill bits:....
R 142.77
Ex VAT:R 124.15
Stock: 213
Model: DR60060
UPC: 6009515836801
HSS standard drill bit
Drill diameter: Ø6.0mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is roll forged.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will drill into steel, non-ferrous metals and plastic.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines to sharpen the HSS standard drill bits:....
R 184.40
Ex VAT:R 160.35
Stock: 297
Model: DR60065
UPC: 6009515836818
HSS standard drill bit
Drill diameter: Ø6.5mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is roll forged.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will drill into steel, non-ferrous metals and plastic.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines to sharpen the HSS standard drill bits:....
R 208.15
Ex VAT:R 181.00
In Stock Soon
Stock: In Stock Soon
Model: DR60080
UPC: 6009515836832
HSS standard drill bit
Drill diameter: Ø8.0mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is roll forged.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will drill into steel, non-ferrous metals and plastic.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines to sharpen the HSS standard drill bits:....
R 309.29
Ex VAT:R 268.95
New Expected Date :
- 10/01/2025
- 15/02/2025
Stock: 66
Model: DR60082
UPC: 6009515836849
HSS standard drill bit
Drill diameter: Ø8.2mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is roll forged.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will drill into steel, non-ferrous metals and plastic.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines to sharpen the HSS standard drill bits:....
R 350.92
Ex VAT:R 305.15
In Stock Soon
Stock: In Stock Soon
Model: DR60105
UPC: 6009515850722
DRILL BIT HSS STANDARD 10.5MM X5 PACK....
R 255.76
Ex VAT:R 222.40
New Expected Date :
- 10/01/2025
Stock: 3
Model: PG46502
UPC: 8011017465029
HEX SHANK DRILL BIT 2MM....
R 75.27
Ex VAT:R 65.45
Stock: 163
Model: TC353042
UPC: 6009675083596
Step drill
Use one drill for many holes. Multiple step and countersink tool for drilling
and countersinking in one smooth operation.
SIZE: Ø6-18mm
STEP DIAMETER: 2mm
STEP HEIGHT: 4mm
STEEL: HSS (High-speed steel)
Application:
Suitable for materials with a maximum thickness of 4 to 6mm depending on the
hardness. The best type of drill for steel plate.
Benefits:
Burr free holes.
Perfectly round holes.
Easy to enlarge holes.
Stronger - more rigid.
Drills pla....
R 275.37
Ex VAT:R 239.45
In Stock Soon
Stock: In Stock Soon
Model: TC353045
UPC: 6009515811914
Step drill
Use one drill for many holes. Multiple step and countersink tool for drilling
and countersinking in one smooth operation.
SIZE: Ø4-22mm
STEP DIAMETER: 2mm
STEP HEIGHT: 5mm
STEEL: HSS (High-speed steel)
Application:
Suitable for materials with a maximum thickness of 4 to 6mm depending on the
hardness. The best type of drill for steel plate.
Benefits:
Burr free holes.
Perfectly round holes.
Easy to enlarge holes.
Stronger - more rigid.
Drills pla....
R 396.92
Ex VAT:R 345.15
New Expected Date :
- 27/11/2024
- 15/03/2025
Stock: 103
Model: TC353046
UPC: 6009515811921
Step drill
Use one drill for many holes. Multiple step and countersink tool for drilling
and countersinking in one smooth operation.
SIZE: Ø5-35mm
STEP HEIGHT: 6mm
STEEL: HSS (High-speed steel)
STEP DIAMETERS:
5, 7.5, 10, 13, 16, 19, 21, 23, 26, 29, 31, 33 & 35mm
Application:
Suitable for materials with a maximum thickness of 4 to 6mm depending on the
hardness. The best type of drill for steel plate.
Benefits:
Burr free holes.
Perfectly round holes.
Easy t....
R 1,096.99
Ex VAT:R 953.90
Stock: 3
Model: TCAC0001
UPC: 6009515814908
Morse Taper to Weldon adaptor
MT3 to Weldon Adaptor
Morse Taper 3 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,168.52
Ex VAT:R 1,016.10
Stock: 37
Model: TCAC0002
UPC: 6009515819873
Morse Taper to Weldon adaptor
MT2 to Weldon Adaptor
Morse Taper 2 adaptor that accept cutters with a 3/4 inch Weldon shank
What is a Weldon Shank?
The term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 1,333.43
Ex VAT:R 1,159.50
Stock: 807
Model: TCAC0004
UPC: 6009515814915
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
30 mm Annular Cutters
Pilot pin with length of 79 mm specifically for annular cutters (broach
cutters) with a cutting length of 30 mm.
....
R 53.71
Ex VAT:R 46.70
Stock: 892
Model: TCAC0005
UPC: 6009515814922
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
55 mm Annular Cutters
Pilot pin with length of 102 mm specifically for annular cutters (broach
cutters) with a cutting length of 55 mm.
....
R 57.21
Ex VAT:R 49.75
In Stock Soon
Stock: In Stock Soon
Model: TCAC010
UPC: 6009515820732
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 437.35
Ex VAT:R 380.30
New Expected Date :
- 23/12/2024
- 15/03/2025
Stock: 410
Model: TCAC014-2
UPC: 6009515814465
Annular Cutters 55mm long
Annular Cutter: Ø 14
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 453.62
Ex VAT:R 394.45
Stock: 31
Model: TCAC016-2
UPC: 6009515814519
Annular Cutters 55mm long
Annular Cutter: Ø 16
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 515.49
Ex VAT:R 448.25
Stock: 302
Model: TCAC018-1
UPC: 6009515814540
Annular Cutters 30mm
Annular Cutter: Ø 18
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 411.01
Ex VAT:R 357.40
Stock: 88
Model: TCAC019-1
UPC: 6009515814564
Annular Cutters 30mm
Annular Cutter: Ø 19
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 419.23
Ex VAT:R 364.55
Stock: 29
Model: TCAC024-2
UPC: 6009515814656
Annular Cutters 55mm long
Annular Cutter: Ø 24
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 749.17
Ex VAT:R 651.45
Stock: 2
Model: TCAC027-2
UPC: 6009515814717
Annular Cutters 55mm long
Annular Cutter: Ø 27
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 731.00
Ex VAT:R 635.65
In Stock Soon
Stock: In Stock Soon
Model: TCAC028-1
UPC: 6009515814724
Annular Cutters 30mm
Annular Cutter: Ø 28
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 584.20
Ex VAT:R 508.00
New Expected Date :
- 15/02/2025
In Stock Soon
Stock: In Stock Soon
Model: TCAC032-1
UPC: 6009515814786
Annular Cutters 30mm
Annular Cutter: Ø 32
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 795.92
Ex VAT:R 692.10
New Expected Date :
- 15/02/2025
In Stock Soon
Stock: In Stock Soon
Model: TCAC032-2
UPC: 6009515814793
Annular Cutters 55mm long
Annular Cutter: Ø 32
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 840.31
Ex VAT:R 730.70
New Expected Date :
- 14/01/2025
- 15/02/2025
In Stock Soon
Stock: In Stock Soon
Model: TCAC033-2
UPC: 6009515814816
Annular Cutters 55mm long
Annular Cutter: Ø 33
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 927.88
Ex VAT:R 806.85
New Expected Date :
- 15/02/2025
Stock: 46
Model: TCAC035-1
UPC: 6009515814823
Annular Cutters 30mm
Annular Cutter: Ø 35
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 845.42
Ex VAT:R 735.15
Stock: 21
Model: TCAC035-2
UPC: 6009515814830
Annular Cutters 55mm long
Annular Cutter: Ø 35
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 1,098.37
Ex VAT:R 955.10
In Stock Soon
Stock: In Stock Soon
Model: TCAC038-2
UPC: 6009515814878
Annular Cutters 55mm long
Annular Cutter: Ø 38
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 1,373.27
Ex VAT:R 1,194.15
New Expected Date :
- 14/01/2025
- 15/02/2025
Stock: 29
Model: TCAC040-2
UPC: 6009515814892
Annular Cutters 55mm long
Annular Cutter: Ø 40
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 1,373.27
Ex VAT:R 1,194.15
Stock: 17
Model: TCAC042-1
UPC: 6009515828400
Annular Cutters 30mm
Annular Cutter: Ø 42
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 1,318.30
Ex VAT:R 1,146.35
Stock: 3
Model: TCAC045-1
UPC: 6009515828424
Annular Cutters 30mm
Annular Cutter: Ø 45
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 1,340.27
Ex VAT:R 1,165.45
Stock: 5
Model: TCAC046-1
UPC: 6009515828431
Annular Cutters 30mm
Annular Cutter: Ø 46
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 1,628.98
Ex VAT:R 1,416.50
Stock: 3
Model: TCAC050-2
UPC: 6009515818968
Annular Cutters 55mm long
Annular Cutter: Ø 50
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 2,473.02
Ex VAT:R 2,150.45
Stock: 5
Model: TCAC055-1
UPC: 6009515865467
ANNULAR HOLE CUTTER HSS 55 X 30MM WELD SHANK 19.05MM....
R 1,923.15
Ex VAT:R 1,672.30
Stock: 8
Model: TCAC058-1
UPC: 6009515865481
ANNULAR HOLE CUTTER HSS 58 X 30MM WELD SHANK 19.05MM....
R 1,785.66
Ex VAT:R 1,552.75
Stock: 3
Model: ALP613015
UPC: 9002740687672
//HSS COBALT JOBBER DRILLS BITS
Size:
Ø 15.0 x 169/114 mm
Bulk: Qty 1
Range of application:
5% cobalt-alloyed jobber drills with high heat-resistance for drilling steels with tensile strength over 800 N/mm², specially suitable for high alloyed steels, bearing-steels, hot/cold-rolled steel. Ideal for stainless steel.
Strengths
Self-centering, due to a special point shaoe
Drilling even with the highest thermal stress up to 600°
Fast, due to special drill gri....
R 1,158.63
Ex VAT:R 1,007.50
Stock: 13
Model: ALP613016
UPC: 9002740687689
//HSS COBALT JOBBER DRILLS BITS
Size:
Ø 16.0 x 178/120 mm
Bulk: Qty 1
Range of application:
5% cobalt-alloyed jobber drills with high heat-resistance for drilling steels with tensile strength over 800 N/mm², specially suitable for high alloyed steels, bearing-steels, hot/cold-rolled steel. Ideal for stainless steel.
Strengths
Self-centering, due to a special point shaoe
Drilling even with the highest thermal stress up to 600°
Fast, due to special drill gri....
R 1,402.48
Ex VAT:R 1,219.55
Stock: 1
Model: ALP65250040
UPC: 9002740923183
ALPEN SC CENTREDRILL 4.0X10.00....
R 2,494.52
Ex VAT:R 2,169.15
Stock: 3
Model: ALP728007291
UPC: 9002740869672
ALPEN STEP DRILL HSS Co5 TIN 6-37MM....
R 7,213.49
Ex VAT:R 6,272.60
Stock: 107
Model: DR55030-1
UPC: 6009515871635
Tork Craft - Double end stubby HSS
Drill diameter: Ø3.0mm
Packaging: Bulk - 1 Piece
Point: 135° split point
Drill bit: HSS (High-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the adantage of reducing the
amount of pressure required to perform the cut.
The sturdy double end allows
for twice the usage making the ....
R 18.23
Ex VAT:R 15.85
Stock: 8
Model: DR55048-1
UPC: 6009515871710
Tork Craft - Double end stubby HSS
Drill diameter: Ø4.8mm
Packaging: Bulk - 1 Piece
Point: 135° split point
Drill bit: HSS (High-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the adantage of reducing the
amount of pressure required to perform the cut.
The sturdy double end allows
for twice the usage making the ....
R 30.25
Ex VAT:R 26.30
Stock: 378
Model: DR55060-1
UPC: 6009515871765
Tork Craft - Double end stubby HSS
Drill diameter: Ø6.0mm
Packaging: Bulk - 1 Piece
Point: 135° split point
Drill bit: HSS (High-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the adantage of reducing the
amount of pressure required to perform the cut.
The sturdy double end allows
for twice the usage making the ....
R 41.92
Ex VAT:R 36.45
Stock: 4
Model: MAY221013
UPC: 9002740107897
ALPEN HSS 1869R-FORTE 3/480 13.00MM....
R 2,172.12
Ex VAT:R 1,888.80
Stock: 87
Model: DR11002
UPC: 6009515881153
DRILL BIT HSS STANDARD 2.0MM HEX SHANK 1/CARD....
R 16.96
Ex VAT:R 14.75
In Stock Soon
Stock: In Stock Soon
Model: DR11008
UPC: 6009515881207
DRILL BIT HSS STANDARD 8.0MM HEX SHANK 1/CARD....
R 48.93
Ex VAT:R 42.55
New Expected Date :
- 10/01/2025
Stock: 424
Model: DR21002
UPC: 6009515881238
DRILL HSS 2.0MM 135DEG 1/CARD HEX SHANK INDUSTRIAL BIT....
R 19.44
Ex VAT:R 16.90
Stock: 338
Model: DR21004
UPC: 6009515881252
DRILL HSS 4.0MM 135DEG 1/CARD HEX SHANK INDUSTRIAL BIT....
R 36.23
Ex VAT:R 31.50