Stock: 24
Model: SG ADV012
UPC: 6009515896508
Comp. Auto Drain Valve - 1/2"
A compressor auto drain valve is an essential component for any compressed air system, designed to automatically
remove condensate (water, oil, and particulates) that accumulates in the air receiver, filters, and other
components.
Application:
Compressor drain
Maintenance / Repair
Pneumatics....
R 692.76
Ex VAT:R 602.40
Stock: 196
Model: GAV5834-1
UPC: 6009515901196
BRASS HOSE TAIL 1-4 MX 6MM....
R 41.40
Ex VAT:R 36.00
Stock: 196
Model: GAV5835-4
UPC: 6009515901257
BRASS HOSE TAIL 3-8 FX 9MM....
R 60.84
Ex VAT:R 52.90
Stock: 10
Model: GAV REC2000-1
UPC: 6009515901998
O-RING SET GAV REC 2000....
R 173.65
Ex VAT:R 151.00
Stock: 10
Model: GAV REC2200-1
UPC: 6009515902001
O-RING SET FOR GAV REC2200....
R 96.60
Ex VAT:R 84.00
Stock: 10
Model: GAV RECORD S-1
UPC: 6009515902025
O-RING SET FOR GAV RECORD S....
R 95.45
Ex VAT:R 83.00
Stock: 10
Model: GAV SUPER PRO-1
UPC: 6009515902063
O-RING SET FOR GAV SUPER PRO....
R 57.50
Ex VAT:R 50.00
Stock: 10
Model: GAV162C-1
UPC: 6009515902087
O-RING SET FOR GAV162C....
R 70.15
Ex VAT:R 61.00
Stock: 802
Model: AT OIL
UPC: 6009691300486
Pneumatic Oil
The professional grade pneumatic oil is filled inside a lubricator. The oil is used to extend life, reduce wear and prevents corrosion on moving parts inside pneumatic power tools.
Ideally, a lubricator should be fitted within a 15m distance from the pneumatic tool.
Pneumatic power tools that need lubrication:
Impact wrenches
Ratchet wrenches
Grinders/Die grinders
Sanders
Drills
Polishers/Buffers
Nail/Staple guns
Jack hammers
Needle scalers
Do..
R 199.30
Ex VAT:R 173.30
Stock: 71
Model: AT0004
UPC: 6009515812720
Impact wrench 1/2" Drive
The impact wrench is used to deliver high torque to either loosen or tighten
projects in many industries from automotive repair to heavy equipment
maintenance.
In operation, a twin hammer is accelerated by the motor to make contact with
the 1/2" output shaft to deliver high impact torque as much as 567 Newton-Meter.
A compressor is required with an air flow delivery of at least 291 l/min at
6.3 Bar to make use of the impact wrench.
Make sure that a..
R 2,934.40
Ex VAT:R 2,551.65
Stock: 112
Model: AT0006
UPC: 6009515812713
Impact wrench 1/2" Drive kit
The impact wrench is used to deliver high torque to either loosen or tighten
projects in many industries from automotive repair to heavy equipment
maintenance.
In operation, a single hammer is accelerated by the motor to make contact
with the 1/2" output shaft to deliver high-impact torque as much as 310
Newton-Meter.
A compressor is required with an airflow delivery of at least 228 l/min at
6.3 Bar to make use of the impact wrench.
Make su..
R 1,574.01
Ex VAT:R 1,368.70
Stock: 86
Model: AT0012
UPC: 6009515816612
Reversible pneumatic drill
The pneumatic drill is ideal for drilling in a production line.
The drill has non-variable speed set to 550 rpm.
A compressor is required with an air flow delivery of at least 170 l/min at
6.3 Bar to make use of the drill.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).....
R 1,245.16
Ex VAT:R 1,082.75
Stock: 218
Model: AT0013
UPC: 6009515816629
Angle grinder - Ø 125mm
Professional pneumatic angle grinder for Ø 115mm and Ø 125mm cutting and grinding discs.
The exhaust is positioned on the front of the gearbox.
A compressor is required with an air flow delivery of at least 142 l/min at
6.3 Bar to make use of the angle grinder
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).....
R 1,916.19
Ex VAT:R 1,666.25
Stock: 665
Model: AT0014
UPC: 6009515820329
Random orbital sander - Ø 150mm
Professional pneumatic random orbital sander with Ø 150mm hook and loop sanding pad.
Heavy duty ball bearing construction for improved lower vibration performance.
A compressor is required with an air flow delivery of at least 425 l/min at
6.3 Bar to make use of the sander.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Recommended replacement backing pad:
FLEX 32320
SPC00107....
R 1,436.70
Ex VAT:R 1,249.30
Stock: 15
Model: AT0017
UPC: 6009515823740
Die grinder - 25 000 rpm
Professional die grinder giving complete flexibility for most grinding and
polishing needs.
The die grinder has non-variable speed set to 25 000 rpm.
A compressor is required with an air flow delivery of at least 115 l/min at
6.3 Bar to make use of the die grinder.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).....
R 477.83
Ex VAT:R 415.50
Stock: 544
Model: AT0019
UPC: 6009515823825
Pneumatic staple gun 21 Gauge
The staple gun makes use of 21 Gauge staples with a crown width of 12.7mm.
It is light in weight, and compact, with an ergonomically shaped handle that is
easy to grip.
Max length of staples: 16mm
Magazine capacity: 125 staples
Great for construction and home repair projects: fabric, upholstery, vinyl
and
light duty wood assembly.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Only use 21 Gauge staples.....
R 979.00
Ex VAT:R 851.30
Stock: 9
Model: AT0022
UPC: 6009515823856
Tyre buffer
The professional tyre buffer makes use of an abrasive wheel to scuff/rough an
area in a tyre that needs repair.
One-hand operation with lever lock dead man switch for safety.
A compressor is required with an airflow delivery of at least 128 l/min at
6.3 Bar to make use of the tyre buffer.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Replacement tyre buff:
AT0022-01....
R 1,352.69
Ex VAT:R 1,176.25
Stock: 198
Model: AT0024
UPC: 6009515826963
Needle scaler
Professional needle scaler for removing paint, rust or welding slag.
Can be used on textured surfaces, example checker plate.
A compressor is required with an airflow delivery of at least 114 l/min at
6.3 Bar to make use of the needle scaler.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Replacement needles:
AT0024-SK02....
R 1,272.76
Ex VAT:R 1,106.75
Stock: 62
Model: AT0025
UPC: 6009515828509
Angle grinder - Ø 180mm
Professional pneumatic angle grinder for Ø 180mm cutting and grinding discs.
A compressor is required with an air flow delivery of at least 2040 l/min at
6.3 Bar to make use of the angle grinder
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).....
R 5,535.18
Ex VAT:R 4,813.20
Stock: 96
Model: AT0027
UPC: 6009675089970
Die grinder with guard - Ø76mm
Professional die grinder giving complete flexibility for most steel cutting needs.
The die grinder has non-variable speed set to 20 000 rpm.
A compressor is required with an air flow delivery of at least 128 l/min at
6.3 Bar to make use of the die grinder.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Ø76mm Cutting disc for die grinder:
ABR07600....
R 553.55
Ex VAT:R 481.35
In Stock Soon
Stock: In Stock Soon
Model: COM UNI A1
UPC: 6009515870928
Universal Quick Coupler 1/4" Female
Quick couplings are universal type and can be used on:
Orion
German
Italian and
USA fittings
Inserts and Quick couplers operating pressure:
• max pressure of 15 bars
Quick Coupler:
• Nickel Plated finish
• Made from BrassInserts:
• Made from steel
Made
in Italy
1/4
inch inli....
R 166.92
Ex VAT:R 145.15
New Expected Date :
- 29/01/2025
Stock: 15
Model: COM UNI A3
UPC: 6009515870942
Universal Quick Coupler 1/2" Female
Quick couplings are universal type and can be used on:
Orion
German
Italian and
USA fittings
Inserts and Quick couplers operating pressure:
• max pressure of 15 bars
Quick Coupler:
• Nickel Plated finish
• Made from BrassInserts:
• Made from steel
Made
in Italy
1/4
inch in....
R 217.98
Ex VAT:R 189.55
Stock: 1124
Model: COM UNI C1
UPC: 6009515870959
Universal Quick Coupler 6mm
Quick couplings are universal type and can be used on:
Orion
German
Italian and
USA fittings
Inserts and Quick couplers operating pressure:
• max pressure of 15 bars
Quick Coupler:
• Nickel Plated finish
• Made from BrassInserts:
• Made from steel
Made
in Italy
1/4
inch inline BSP thread
....
R 170.89
Ex VAT:R 148.60
Stock: 383
Model: COM UNI C4
UPC: 6009515870980
Universal Quick Coupler W/12mm Hose Tail
Quick couplings are universal type and can be used on:
Orion
German
Italian and
USA fittings
Inserts and Quick couplers operating pressure:
• max pressure of 15 bars
Quick Coupler:
• Nickel Plated finish
• Made from BrassInserts:
• Made from steel
Made
in Italy
1/4
inch inlin....
R 194.41
Ex VAT:R 169.05
Stock: 720
Model: COM23C 6MM
UPC: 6009515879006
Quick
Coupler/Inserts Aro 6mm
Quick couplings are universal type and can be used on:
Orion
German
Italian and
USA fittings
Inserts and Quick couplers operating pressure:
• max pressure of 15 bars
Quick Coupler:
• Nickel Plated finish
• Made from BrassInserts:
• Made from steel
Made
in Italy
1/4
inch inline BSP thr....
R 43.24
Ex VAT:R 37.60
Stock: 3
Model: COM4050-2P
UPC: 6009515861025
NON-RETURN VALVE 1/2" - M/F BX16VRN114 X1 PER PACK....
R 330.34
Ex VAT:R 287.25
In Stock Soon
Stock: In Stock Soon
Model: COM4051-3
UPC: 6009515874032
RUBBER SEAL 1" NON-RETURN VALVE....
R 224.08
Ex VAT:R 194.85
New Expected Date :
- 29/01/2025
Stock: 166
Model: COM4052-2
UPC: 6009515893958
SPARE FERRULE FOR NON-RETURN VALVE....
R 39.56
Ex VAT:R 34.40
Stock: 18
Model: EC11-13
UPC: 6009515860394
Tork Craft Double Ear Clamp C/steel 11-13mm (10pc Per Box)
Features:
Double ear clamps are a simple, economical solution for many
difficult tightening or sealing problems. The design allows for quick and easy
installation. When the clamp is in place, either side is squeezed tight with
pincers. One major benefit is that there is no grabbing from the clamps when
being used in industries where the hose is being dragged a lot.
Kindly note that the price is per one unit - one clamp....
R 6.04
Ex VAT:R 5.25
Stock: 1880
Model: EC13-15
UPC: 6009515845568
Tork Craft Double Ear Clamp C/steel 13-15mm (10pc Per Box)
Features:
Double ear clamps are a simple, economical solution for many
difficult tightening or sealing problems. The design allows for quick and easy
installation. When the clamp is in place, either side is squeezed tight with
pincers. One major benefit is that there is no grabbing from the clamps when
being used in industries where the hose is being dragged a lot.
Kindly note that the price is per one unit - one ....
R 8.05
Ex VAT:R 7.00
Stock: 2026
Model: EC15-18
UPC: 6009515845575
Tork Craft Double Ear Clamp C/steel 15-18mm (10pc Per Box)
Features:
Double ear clamps are a simple, economical solution for many
difficult tightening or sealing problems. The design allows for quick and easy
installation. When the clamp is in place, either side is squeezed tight with
pincers. One major benefit is that there is no grabbing from the clamps when
being used in industries where the hose is being dragged a lot.
Kindly note that the price is per one unit - one ....
R 8.17
Ex VAT:R 7.10
Stock: 579
Model: EC9-12
UPC: 6009515860400
Tork Craft Double Ear Clamp C/steel 9-12mm (10pc Per Box)
Features:
Double ear clamps are a simple, economical solution for many
difficult tightening or sealing problems. The design allows for quick and easy
installation. When the clamp is in place, either side is squeezed tight with
pincers. One major benefit is that there is no grabbing from the clamps when
being used in industries where the hose is being dragged a lot.
Kindly note that the price is per one unit - one clamp....
R 6.21
Ex VAT:R 5.40
Out Of Stock
Stock: Out Of Stock
Model: GAV 60AP S
Silencer
accessory for GAV 60AP blow gun
Fits on the GAV 60AP blow gun / air duster
Silences the air that is released during operation.
Made
in Italy ....
R 79.29
Ex VAT:R 68.95
Stock: 8
Model: GAV AB-3P
UPC: 6009515815721
Airblock
Safety Quick Coupler (packaged)
Airblock is designed to first shut off the air and then
open to release the coupler connection.
A true safety feature
Excellent airflow characteristics
Universal type coupling
Patented design
Made
in Italy
1/2
inch male BSP thread
The air flow freely through the coupler
Push
release backwards. The flow of air is cut and the pressure is vented.
Th....
R 664.41
Ex VAT:R 577.75
Stock: 141
Model: GAV AB-A1
UPC: 8011275008372
Airblock
Safety Quick Coupler
Type AB-A1
Airblock is designed to first shut off the air and then
open to release the coupler connection.
A true safety feature
Excellent airflow characteristics
Universal type coupling
Patented design
Made
in Italy
1/4
inch female BSP thread
The air flow freely through the coupler
Push
release backwards. The flow of air is cut and the pressure is vented.
....
R 504.10
Ex VAT:R 438.35
Stock: 25
Model: GAV AB-C3
UPC: 6009515874070
Airblock
Safety Quick Coupler
Type AB-C3 (Bulk)
Airblock is designed to first shut off the air and then
open to release the coupler connection.
A true safety feature
Excellent airflow characteristics
Universal type coupling
Patented design
Made
in Italy
Connects direct to 10 mm ID hose
The air flow freely through the coupler
Push
release backwards. The flow of air is cut and the pressure is vente....
R 549.87
Ex VAT:R 478.15
Stock: 8
Model: GAV AB-C3P
UPC: 6009515815769
Airblock
Safety Quick Coupler
Type AB-C3P (Packaged)
Airblock is designed to first shut off the air and then
open to release the coupler connection.
A true safety feature
Excellent airflow characteristics
Universal type coupling
Patented design
Made
in Italy
Connects direct to 10 mm ID hose
The air flow freely through the coupler
Push
release backwards. The flow of air is cut and the pressure is ....
R 561.32
Ex VAT:R 488.10
Stock: 11
Model: GAV ABM-2
UPC: 6009515874094
AIRBLOCK SECURITY MAGNUM COUPLER 1/2"MALE TWO STAGE RELEASE SAFTEY....
R 805.29
Ex VAT:R 700.25
Stock: 133
Model: GAV BX300-A1
UPC: 6009515874131
Universal Quick Coupler
Type Light
Body: nickel-plated brass/aluminium
Tip: PA66 loaded glass with aluminium ring
Air valve: brass
Lock: 6-ball steel
Made
in Italy
Supplied with 1/4 inch BSP female thread
The British Standard
Pipe (BSP) is a family of standard screw thread types that has been adopted internationally
for interconnecting and sealing pipe ends by mating an external (male) with an internal
(female) thread and has been a....
R 240.75
Ex VAT:R 209.35
Stock: 11
Model: GAV BX300-C2P
UPC: 6009515844042
Universal Quick Coupler
Type Light (Packaged)
Body: nickel-plated brass/aluminium
Tip: PA66 loaded glass with aluminium ring
Air valve: brass
Lock: 6-ball steel
Made
in Italy
Connects direct to 8 mm ID hose
....
R 265.77
Ex VAT:R 231.10
Stock: 52
Model: GAV F180
UPC: 8011275002172
Pressure
filter for compressed air
Type F180 (12 Bar)
The F-180 Compressed Filter is a tool designed with jettisoning and protection cup. The cup has a fluid capacity if 30 ml. It has a maximum inlet pressure of 12 bar and a filtering of 10 micron. Moreover, this compressed filter has a maximum working pressure of 2.100 Nl/min or 6 bar.
Made
in Italy
1/4 inch BSP female thread
both sides....
R 1,034.08
Ex VAT:R 899.20
Stock: 108
Model: GAV FRL200
UPC: 8011275001984
Modular
filter/regulator/lubricator
Type FRL200
Regulator range: 0 - 12 Bar
It has a maximum inlet pressure of 16 bar
Filtration: 10 micron
Maximum flow rate of 5000 Nl/min at 6 bar.
Manometer included.
Regulator with control knob with lock.
Made
in Italy
1/2 inch BSP female thread
both sides
Manometer included
....
R 3,244.38
Ex VAT:R 2,821.20
Stock: 13
Model: GAV FRL300
UPC: 8011275011471
Modular
filter/regulator/lubricator
Type FRL300
Regulator range: 0 - 12 Bar
It has a maximum inlet pressure of 16 bar
Filtration: 10 micron
Maximum flow rate of 8000 Nl/min at 6 bar.
Manometer included.
Regulator with control knob with lock.
Made
in Italy
1 inch BSP female thread
both sides
Manometer included
....
R 7,671.02
Ex VAT:R 6,670.45
Stock: 173
Model: GAV KIT2
UPC: 8011275024273
Workshop
kit with gravity feed spray gun
GAV KIT 2
Contains:
Blow gun (air duster) (mod. 60A),
Inflating gun (mod. 60D),
Washing gun (mod. 61B),
Gravity feed spray gun (mod. 162A),
Spiral hose 5 m....
R 2,226.69
Ex VAT:R 1,936.25
In Stock Soon
Stock: In Stock Soon
Model: GAV M40R
UPC: 6009600405233
Pressure
gauge 40mm
Model M40R
Rear
Connection
Measurement range: 0 - 12 Bar
Rear connection with 1/8" BSP male thread
Made
in Italy
1/8 inch BSP Male thread....
R 181.07
Ex VAT:R 157.45
New Expected Date :
- 15/01/2025
- 29/01/2025
Stock: 236
Model: GAV M40R-1
UPC: 6009600408951
Pressure
gauge 40mm
Model M40R
Rear
Connection
Measurement range: 0 - 12 Bar
Rear connection with 1/4" BSP male thread
Made
in Italy
1/4 inch BSP Male thread....
R 181.07
Ex VAT:R 157.45
Stock: 19
Model: GAV M40R-1P
UPC: 6009515875213
Pressure
gauge 40mm
Model M40R
Rear
Connection
Measurement range: 0 - 12 Bar
Rear connection with 1/4" BSP male thread
Made
in Italy
1/4 inch BSP Male thread....
R 203.90
Ex VAT:R 177.30
Out Of Stock
Stock: Out Of Stock
Model: GAV M45R
UPC: 6009515874216
Digital Pressure
Gauge 45mm
Model M45R
Rear
Connection
Measurement range: 0 - 16 Bar
Rear connection with 1/8" BSP male thread
Made in Italy
1/8 inch BSP Male thread....
R 673.15
Ex VAT:R 585.35
Stock: 17
Model: GAV M50R-1P
UPC: 6009515844073
Digital Pressure
Gauge 50mm
Model M50R-1 (Packaged)
Rear
Connection
Measurement range: 0 - 12 Bar
Rear connection with 1/8" BSP male thread
Made in Italy
1/8 inch BSP Male thread....
R 226.84
Ex VAT:R 197.25