45 POLYURETHANE GUN FOAM

Installation guide

1. Wear protective gloves. Ensure surfaces are free from dust, dirt or debris.
2. Before using, make sure that the can temperature is above zero (optimum +20°C). Application temperature from +5°C up to +30°C.
3. Shake can vigorously for 30 seconds to mix properly components.
4. Screw gun onto the can. Hold can upside-down during application.
5. Moisten surfaces with water prior to application.
6. Fill gaps from down to up, zigzag motion, alternating from one wall to the other. Fill gaps to approximately 60 % volume. Max. wide of the gap 3-4 cm. Wider gaps should be applied after hardening of the previous layer. Each layer should be moistened with water using a spray.
7. Once fully hardened, foam must be protected from UV exposure by coating with plaster, paint, acrylic or silicone.
8. In the event of a stoppage exceeding five minutes duration, wipe the nozzle with cleaner for foam applicator.
9. After removing the applicator gun from the can, wipe down the nozzle and gun (internal and external surfaces) using a cleaner.

Features and benefits

• Ideal for mounting, sealing and soundproofing.
• Excellent sound and thermal insulation properties.
• Extremely rapid curing – workable 40 minutes after optimum application.
• Resistant to mould and fungi.

Applications

• Fixing (for installation of doors and windows)
• Thermal insulation of plumbing and central heating
• Thermal insulation of roofing (including flat roofs)
• Installation & sealing of window sills
• Filling gaps in the thermal insulation of buildings
• Filling frame structures

Base material

Wood	Stainless steel	Structural Steel

Other materials

Aerated Concrete Block	Ceramics	Chipboard	Concrete
Glass	Hollow Brick	Hollow Sand-lime Brick	Natural Stone
Plasterboard	Plastic	Plywood	Solid Brick

Technical Data