Stock: 95
Model: TCAC030-2
UPC: 6009515814755
Annular Cutters 55mm long
Annular Cutter: Ø 30
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 892.17
Ex VAT:R 775.80
Stock: 25
Model: TCAC031-1
UPC: 6009515814762
Annular Cutters 30mm
Annular Cutter: Ø 31
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 782.17
Ex VAT:R 680.15
Stock: 7
Model: TCAC031-2
UPC: 6009515814779
ANNULAR HOLE CUTTER HSS 31 X 55MM WELD SHANK 19.05MM....
R 740.95
Ex VAT:R 644.30
Stock: 20
Model: TCAC033-1
UPC: 6009515814809
Annular Cutters 30mm
Annular Cutter: Ø 33
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 804.20
Ex VAT:R 699.30
Stock: 82
Model: TCAC034-2
UPC: 6009515842604
ANNULAR HOLE CUTTER HSS 34 X 55MM WELD SHANK 19.05MM....
R 960.88
Ex VAT:R 835.55
Stock: 4
Model: TCAC036-1
UPC: 6009515814847
Annular Cutters 30mm
Annular Cutter: Ø 36
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 864.63
Ex VAT:R 751.85
Stock: 98
Model: TCAC036-2
UPC: 6009515814854
Annular Cutters 55mm long
Annular Cutter: Ø 36
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 1,208.31
Ex VAT:R 1,050.70
In Stock Soon
Stock: In Stock Soon
Model: TCAC038-1
UPC: 6009515814861
Annular Cutters 30mm
Annular Cutter: Ø 38 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twist ....
R 1,167.08
Ex VAT:R 1,014.85
New Expected Date :
- 14/01/2025
- 15/02/2025
In Stock Soon
Stock: In Stock Soon
Model: TCAC044-1
UPC: 6009515828417
Annular Cutters 30mm
Annular Cutter: Ø 44
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 1,532.72
Ex VAT:R 1,332.80
New Expected Date :
- 15/02/2025
In Stock Soon
Stock: In Stock Soon
Model: TCAC044-2
UPC: 6009515828462
Annular Cutters 55mm long
Annular Cutter: Ø 44
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 1,718.33
Ex VAT:R 1,494.20
New Expected Date :
- 14/01/2025
In Stock Soon
Stock: In Stock Soon
Model: TCAC045-2
UPC: 6009515828479
Annular Cutters 55mm long
Annular Cutter: Ø 45
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 1,785.66
Ex VAT:R 1,552.75
New Expected Date :
- 15/02/2025
Stock: 15
Model: TCMD001
UPC: 6009515882808
TOOL HOLDER MT2 X 19.05 (INNER) FOR WELDON SHANK MORSE TAPER....
R 1,406.46
Ex VAT:R 1,223.01
Stock: 93
Model: TCAC012-4
UPC: 6009515895013
ANNULAR HOLE CUTTER TCT 12 X 55MM WELD SHANK 19.05MM....
R 956.63
Ex VAT:R 831.85
Stock: 23
Model: TCAC016-3
UPC: 6009515895044
ANNULAR HOLE CUTTER TCT 16 X 35MM WELD SHANK 19.05MM....
R 845.54
Ex VAT:R 735.25
Stock: 154
Model: TCAC018-3
UPC: 6009515895068
ANNULAR HOLE CUTTER TCT 18 X 35MM WELD SHANK 19.05MM....
R 845.54
Ex VAT:R 735.25
Stock: 77
Model: TCAC020-4
UPC: 6009515895099
ANNULAR HOLE CUTTER TCT 20 X 55MM WELD SHANK 19.05MM....
R 956.63
Ex VAT:R 831.85
Stock: 29
Model: TCAC024-4
UPC: 6009515895136
ANNULAR HOLE CUTTER TCT 24 X 55MM WELD SHANK 19.05MM....
R 956.63
Ex VAT:R 831.85
Stock: 46
Model: TCAC028-4
UPC: 6009515895174
ANNULAR HOLE CUTTER TCT 28 X 55MM WELD SHANK 19.05MM....
R 1,007.40
Ex VAT:R 876.00
Stock: 42
Model: TCAC030-4
UPC: 6009515895198
ANNULAR HOLE CUTTER TCT 30 X 55MM WELD SHANK 19.05MM....
R 1,007.40
Ex VAT:R 876.00
Stock: 16
Model: TCAC032-4
UPC: 6009515895211
ANNULAR HOLE CUTTER TCT 32 X 55MM WELD SHANK 19.05MM....
R 1,278.40
Ex VAT:R 1,111.65
Stock: 16
Model: TCAC060-1
UPC: 6009515894948
ANNULAR HOLE CUTTER HSS 60 X 30MM WELD SHANK 19.05MM....
R 2,494.52
Ex VAT:R 2,169.15
Stock: 20
Model: TCAC070-4
UPC: 6009515895235
ANNULAR HOLE CUTTER TCT 70 X 55MM WELD SHANK 19.05MM....
R 3,109.31
Ex VAT:R 2,703.75
Stock: 21
Model: TCAC075-3
UPC: 6009515895242
ANNULAR HOLE CUTTER TCT 75 X 30MM WELD SHANK 31.75MM....
R 3,012.60
Ex VAT:R 2,619.65
Stock: 22
Model: TCAC080-3
UPC: 6009515895266
ANNULAR HOLE CUTTER TCT 80 X 30MM WELD SHANK 31.75MM....
R 3,311.37
Ex VAT:R 2,879.45
Stock: 23
Model: TCAC083-4
UPC: 6009515895297
ANNULAR HOLE CUTTER TCT 83 X 55MM WELD SHANK 31.75MM....
R 4,419.34
Ex VAT:R 3,842.90
Stock: 22
Model: TCAC090-3
UPC: 6009515895303
ANNULAR HOLE CUTTER TCT 90 X 30MM WELD SHANK 31.75MM....
R 4,068.82
Ex VAT:R 3,538.10
Stock: 22
Model: TCAC090-4
UPC: 6009515895310
ANNULAR HOLE CUTTER TCT 90 X 55MM WELD SHANK 31.75MM....
R 4,703.73
Ex VAT:R 4,090.20
Stock: 31
Model: TCAC0005-02
UPC: 6009515897819
PILOT PIN TCT CUTTER 18 - 102MM X 35MM 7.9 X 90MM BROACH CUTTERS....
R 104.08
Ex VAT:R 90.50
Stock: 33
Model: TCAC0005-03
UPC: 6009515897826
PILOT PIN TCT CUTTER 12 - 17MM X 35MM 6.3 X 90MM BROACH CUTTE....
R 72.28
Ex VAT:R 62.85
Stock: 26
Model: TCAC0005-04
UPC: 6009515897833
PILOT PIN TCT CUTTER 18MM - 102MM X 50MM 7.9 X 108MM BROACH CUTTE....
R 119.72
Ex VAT:R 104.10
In Stock Soon
Stock: In Stock Soon
Model: TCAC008
UPC: 6009515820718
8mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 329.76
Ex VAT:R 286.75
New Expected Date :
- 23/12/2024
In Stock Soon
Stock: In Stock Soon
Model: TCAC009
UPC: 6009515820725
9mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 414.40
Ex VAT:R 360.35
New Expected Date :
- 23/12/2024
Stock: 48
Model: TCAC012-1
UPC: 6009515814427
Annular Cutters 30mm
Annular Cutter: Ø 12 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twist ....
R 383.53
Ex VAT:R 333.50
Stock: 156
Model: TCAC013-1
UPC: 6009515814441
Annular Cutters 30mm
Annular Cutter: Ø 13
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 364.26
Ex VAT:R 316.75
Stock: 77
Model: TCAC015-2
UPC: 6009515814496
Annular Cutters 55mm long
Annular Cutter: Ø 15
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 460.52
Ex VAT:R 400.45
Stock: 446
Model: TCAC016-1
UPC: 6009515814502
Annular Cutters 30mm
Annular Cutter: Ø 16
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 391.35
Ex VAT:R 340.30
Stock: 305
Model: TCAC017-1
UPC: 6009515814526
Annular Cutters 30mm
Annular Cutter: Ø 17
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 409.63
Ex VAT:R 356.20
Stock: 399
Model: TCAC018-2
UPC: 6009515814557
Annular Cutters 55mm long
Annular Cutter: Ø 18
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 584.20
Ex VAT:R 508.00
Stock: 31
Model: TCAC019-2
UPC: 6009515814571
Annular Cutters 55mm long
Annular Cutter: Ø 18
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 597.94
Ex VAT:R 519.95
Stock: 24
Model: TCAC020-2
UPC: 6009515814595
Annular Cutters 55mm long
Annular Cutter: Ø 20
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 603.46
Ex VAT:R 524.75
Stock: 130
Model: TCAC022-1
UPC: 6009515814625
Annular Cutters 30mm
Annular Cutter: Ø 22
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 512.61
Ex VAT:R 445.75
In Stock Soon
Stock: In Stock Soon
Model: TCAC024-1
UPC: 6009515814649
Annular Cutters 30mm
Annular Cutter: Ø 24
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 552.46
Ex VAT:R 480.40
New Expected Date :
- 15/02/2025
Stock: 48
Model: TCAC025-1
UPC: 6009515814663
Annular Cutters 30mm
Annular Cutter: Ø 25
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 542.97
Ex VAT:R 472.15
Stock: 109
Model: TCAC025-2
UPC: 6009515814670
Annular Cutters 55mm long
Annular Cutter: Ø 25
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 776.65
Ex VAT:R 675.35
Stock: 19
Model: TCAC027-1
UPC: 6009515814700
Annular Cutters 30mm
Annular Cutter: Ø 27
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 641.07
Ex VAT:R 557.45
Stock: 168
Model: TCAC028-2
UPC: 6009515814731
Annular Cutters 55mm long
Annular Cutter: Ø 28
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 823.40
Ex VAT:R 716.00
Stock: 54
Model: TCAC030-1
UPC: 6009515814748
Annular Cutters 30mm
Annular Cutter: Ø 30
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 680.46
Ex VAT:R 591.70
Stock: 20
Model: TCAC034-1
UPC: 6009515842598
ANNULAR HOLE CUTTER HSS 34 X 30MM WELD SHANK 19.05MM....
R 817.94
Ex VAT:R 711.25
Stock: 34
Model: TCAC040-1
UPC: 6009515814885
Annular Cutters 30mm
Annular Cutter: Ø 40
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw....
R 1,182.20
Ex VAT:R 1,028.00
In Stock Soon
Stock: In Stock Soon
Model: TCAC042-2
UPC: 6009515828455
Annular Cutters 55mm long
Annular Cutter: Ø 42
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is th....
R 1,510.76
Ex VAT:R 1,313.70
New Expected Date :
- 15/02/2025