Media Release 18 Sep 2023

Media Release

LOADSHEDDING? NO PROBLEM WITH TORK CRAFT CORDLESS!

Tork Craft's growing range of cordless power tools get the job done

Tork Craft tools has the perfect power tool antidote for loadshedding, or working away from a fixed power source, whatever the job or situation at hand. Tork Craft's growing range of cordless power tools are designed, primed and ready allow you to keep on working, whatever the challenge. So the work goes on, no matter if there's a power cut, or any lack of electricity on site.

Designed with flexibility and durability in mind, Tork Craft's powerful 35 Nm 20-volt cordless drill driver DD10 delivers performance where it is needed, whether it be drilling or screw driving. Featuring a built-in LED work light to illuminate the job for greater accuracy, direction of rotation is also easy to change at a flick of the switch behind the trigger.

This machine has a 10 mm chuck capacity and operates between 400 and 1100 rpm ready to bore 10 mm holes through steel and 13 mm in wood. Like most Tork Craft cordless tools its quick-charging 20V lithium-ion battery requires 100 to 240 volts at 50 to 60 Hertz. DD10 comes with its battery and charger, a magnetic bit holder, 32 25 mm S2 insert bits, six roll forged steel bits and five brad point wood bits, packed in a tough blow moulded case.

Bigger and bolder with all the same tough and capable features, Tork Craft's 50 Nm 20V cordless impact drill 20V ID13 is rated between 450 and 1750 rpm. Its 13 mm chuck capacity will drill 13 mm steel and masonry, and 32 mm wood holes. Powerful and precise, Tork Craft ID13 delivers drilling, screwdriving, or percussion drilling performance wherever it is needed.

Stepping up a notch, the flexible and durable Tork Craft ID13B cordless drill has a slightly enhanced 500 and 1800 rpm operating window. Its brushless motor however brings increased torque at lower drilling speeds to ensure increased battery performance and improved service life. Both ID13 drills come with a spare 20V 2.0Ah battery and a belt clip.

Like its siblings, the 110 Nm Tork Craft 20V impact driver is fully equipped to ensure ultimate performance, this time more focussed on screw driving. Speed rated up to 2600 rpm with a 3400 ipm impact rate, this two-speed two-direction machine brings variable driving power.

A quick connect 1/4' adaptor and 10 mm keyless chuck add maximum drilling convenience, while a 19+1 torque setting will satisfy any working need. A battery power indicator and built-in LED work light add even more convenience. Tork Craft offers a cool high value cordless twin pack of a DD10 drill and ID110 impact driver for the busy technician.

Tork Craft also offers a powerful 20V cordless angle grinder and rotary hammer. Both feature an auxiliary handle that can be positioned 360 degrees around the chuck for added control. The angle grinder has an 8500 rpm brushless motor to power 115 or 125 mm diameter discs. The SDS plus 1500 rpm rotary hammer has a 5500 ipm 1.8 J impact frequency.

Tork Craft also offers a cordless 12-volt mini sander, and a USB-rechargeable 3.7-volt cordless mini grinder, as well as all the necessary components, accessories, and spares for its entire cordless power tool range.

Tork Craft is a Vermont Sales brand. Established in 1985, Vermont Sales offers a huge range of tool solutions from more than 50 leading, tried, tested, and guaranteed  brands. Available through well over 3,000 outlets across Southern Africa, and backed by the Vermont Sales Force, the company also offers comprehensive training across all its brands.  Learn more at vermontsales.co.za.