Search
Search Criteria
Products meeting the search criteria
In Stock Soon
Stock: In Stock Soon
Model: TCPU05100
UPC: 6009515820428
TorkCraft - Centre Punches
Size: 5 x 10 x 100 mm
Application:
The Tork Craft Centre Punch has a sharp point for precision, for making indetations in metal
& indent assist with accurate drilling
Sharp point for precision
For making indetations in metal
Indent assist with accurate drilling
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.....
R 91.77
Ex VAT:R 79.80
New Expected Date :
- 23/12/2024
- 15/03/2025
Stock: 458
Model: TCPU10003
UPC: 6009515820435
TorkCraft - Centre Punch Set
Qty: 3 Piece Set
Sizes: 3x10x100 | 4x10x100 | 5x10x100
Application:
The Tork Craft Centre Punch has a sharp point for precision, for making indetations in metal
& indent assist with accurate drilling
Sharp point for precision
For making indetations in metal
Indent assist with accurate drilling
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.....
R 236.50
Ex VAT:R 205.65
Stock: 44
Model: TCCP020
UPC: 6009515815806
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 20 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
R 178.60
Ex VAT:R 155.30
Stock: 70
Model: TCCP025
UPC: 6009515815820
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 25 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
R 237.65
Ex VAT:R 206.65
In Stock Soon
Stock: In Stock Soon
Model: TCCP0254
UPC: 6009515815837
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 25.4 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the d..
R 233.91
Ex VAT:R 203.40
New Expected Date :
- 15/01/2025
Stock: 14
Model: TCCP050
UPC: 6009515815974
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 50 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
R 704.61
Ex VAT:R 612.70
Stock: 13
Model: TCCP016
UPC: 6009515815790
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 16 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
R 114.77
Ex VAT:R 99.80
Stock: 659
Model: TCPU03100
UPC: 6009515820404
TorkCraft - Centre Punches
Size: 3 x 10 x 100 mm
Application:
The Tork Craft Centre Punch has a sharp point for precision, for making indetations in metal
& indent assist with accurate drilling
Sharp point for precision
For making indetations in metal
Indent assist with accurate drilling
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.....
R 91.77
Ex VAT:R 79.80
Stock: 535
Model: TCPU04100
UPC: 6009515820411
TorkCraft - Centre Punches
Size: 4 x 10 x 100 mm
Application:
The Tork Craft Centre Punch has a sharp point for precision, for making indetations in metal
& indent assist with accurate drilling
Sharp point for precision
For making indetations in metal
Indent assist with accurate drilling
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.....
R 91.77
Ex VAT:R 79.80
Stock: 131
Model: TCCP022
UPC: 6009515815813
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 22 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
R 224.83
Ex VAT:R 195.50
In Stock Soon
Stock: In Stock Soon
Model: TCCP030
UPC: 6009515815844
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 30 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
R 351.56
Ex VAT:R 305.70
New Expected Date :
- 15/01/2025
Stock: 17
Model: TCCP035
UPC: 6009515815868
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 35 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
R 538.37
Ex VAT:R 468.15
Stock: 301
Model: TCCP038
UPC: 6009515815875
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 38 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
R 580.98
Ex VAT:R 505.20
In Stock Soon
Stock: In Stock Soon
Model: TCCP040
UPC: 6009515815967
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 40 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
R 586.90
Ex VAT:R 510.35
New Expected Date :
- 15/01/2025
Stock: 56
Model: TCCP054
UPC: 6009515815981
TorkCraft - Chassis Screw Sheet Metal Punch
Size: 54 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the dra..
R 763.43
Ex VAT:R 663.85
Stock: 19
Model: FIX F1BT38
UPC: 6940425104218
10 Piece Pin, Nail and Centre Punch Tray Set
F1.BT38 Set of Punches (10 pieces)
Insert for tool our tool cabinets. 1/3 drawer size, 10 pieces. The set consists of
4 pin punches, 5 nail punches and 1 centre punch.
Made of high quality chrome vanadium steel.....
R 1,830.63
Ex VAT:R 1,591.85
Showing 1 to 16 of 16 (1 Pages)
Information
No Search criteria specified